HomeMy WebLinkAboutI-9 Staff Report - Approval of Purchase of Electric Serivice TruckUB CONSENT ITEM
I-9
TO: HONORABLE CHAIRPERSON AND MEMBERS OF THE AZUSA UTILITY
BOARD
FROM: MANNY ROBLEDO, DIRECTOR OF UTILITIES
DATE: JULY 20, 2020
SUBJECT: APPROVAL OF PURCHASE OF 2021 FORD F550 EQUIPPED WITH
ARTICULATING TELESCOPIC AERIAL DEVICE FOR ELECTRIC
OPERATIONS
BACKGROUND:
The Electric Division’s existing service truck is at the end of its useful life and budgeted for
replacement due to heavy wear. Staff recommends the purchase of a new Ford F-550 truck
equipped with a service body and the tools necessary to perform routine, on-call, and emergency
response to electrical outages.
RECOMMENDATION:
Staff recommends the Utility Board take the following action:
1)Waive the competitive purchase requirements pursuant to Section 2-521(a), Article
VII, Chapter 2 of the Azusa Municipal Code (Cooperative and Piggyback
Purchasing); and
2) Approve the issuance of a Purchase Order to Altec Industries Inc. in an amount not-
to-exceed $164,971.48 including sales tax and delivery charges, for a 2019 Ford F-
550 service truck equipped with Altec telescopic articulating aerial device with ISO-
Boom
ANALYSIS:
The Electric Operations service crew currently has a 2011 Ford F-350 work truck which is used
daily for routine, on-call and emergency response. The current truck is almost 10 years old with
APPROVED
UTILITY BOARD
7/20/2020
Electric Division Service Truck
July 20, 2020
Page 2
over 70,000 miles and is in frequent need of repair. In addition, the bucket and the boom which
is used to lift crew members to the top of the power poles are no longer safe and reliable.
Staff has obtained a quote from Altec through Sourcewell Contract # 012418-ALT for a Ford F-
550 truck with Altec’s telescopic articulating aerial device with ISO-Boom.
FISCAL IMPACT:
The fiscal impact is $164,971.48 including applicable tax and delivery. This purchase was
included in the Fiscal Year 2020-21 budget, and there are sufficient funds available in Account
No. 32-40-733-920-7135.
Prepared by: Reviewed and Approved:
Hien K. Vuong Manny Robledo
Assistant Director of Utilities – Electric Operations Director of Utilities
Dave Patterson
Electric Distribution Supervisor
Reviewed and Approved:
Sergio Gonzalez
City Manager
Attachment:
1) Proposal from Altec Industries Inc.
Quote Number: 697137 - 1
Altec, Inc.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Page 1 of 11
July 2, 2020
Our 91st Year
Ship To:Bill To:
CITY OF AZUSA
LIGHT & WATER DEPT
729 N AZUSA AVE
AZUSA, CA 91702
US
Attn:
Phone: 626-812-5240
Email:
CITY OF AZUSA
A/P LIGHT & POWER - ELECTRICAL DIV
PO BOX 9500
AZUSA, CA 91702-1395
United States
Altec Quotation Number:697137 - 1
Account Manager:Albert Gutierrez
Technical Sales Rep:Brooklyn Ryan Russell
Item Description Qty Price
Unit
1.ALTEC Model AT40-G telescopic articulating Aerial device with lSO-Boom.1
A.ISO Boom: the inner telescopic fiberglass boom maintains full dielectric integrity
even with the fiberglass inner boom fully retracted.
B.Hydraulic platform leveling system.
C.Hydraulic tool circuit at the platform.
D.Emergency lowering valve at the platform.
E.Single handle control at the platform with a safety interlock system.
F.Two (2) operators and maintenance/parts manuals.
G.Working height: 45.6 feet
H.Side reach: 29.7 feet
I.Low-power fiber-optic control system (FOC-L).
J.Continuous rotation
2.AT40G Unit Model 1
3.Post style pedestal mounting Use grade 8 bolts in lieu of huck bolts.1
4.Poly Hydraulic Reservoir, Pedestal Mounted, 7 Gallon (Includes Sight Gauge)1
5.Single One-Man End-Mounted Platform With 180 Degree Rotator, 24 X 30 X 42.
Platform is rated at 400 pounds. Control panel on platform dashboard provides controls
for auxiliary functions. Includes emergency stop (push-pull) switch and rocker switches,
which operate platform leveling, platform rotation, tools, and battery selector (for
fiber-optic controls system). Composite fiberglass platform mounting bracket. (AT40G)
1
6.Platform Leveling At Lower Controls. AT40-G 1
7.One (1) Platform Step Located 21'' (Midway) From Top Of Step To Top Of Platform 1
8.254 Platform Cover - foam filled vinyl (24 x 30) for single, one-man, fiberglass platform.
Included Altec A logo.
1
Sourcewell Contract # 012418-ALT
Attachment 1
Quote Number:697137 - 1
Altec, Inc.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Page 2 of 11
Item Description Qty Price
9.Platform liner for a 24 x 30 x 42 inch platform 1
10.4-Function Single Handle Fiber-Optic Controller. 1
11.Engine Start/Stop at the upper controls actuated through the Fiber-Optic controls
system with Secondary Stowage System (AT40G)
1
12.Manual lowering valve located at the boomtip. For use in emergency situations to allow
the operator to lower the boom to the ground
1
13.Powder coat unit Altec White. 1
14.Additional Unit Option Install platform capacity decal on the upper portion of the platform
in lieu of just above the access steps.
1
15.Additional Unit Option mechanical articulating arm stop installed to stop the articulating
arm 17.25" above the turntable.
1
16.Additional Unit Option Lower boom lifting eye, with 300 lb. capacity at all angles 1
17.Additional Unit Option 6" taller pedestal riser/mount to ensure that the unit clears the
body and lights.
1
18.Additional Unit Option provide ample clearance between the platform controls cover and
the platform lip for the foam filled platform cover to be installed.
1
Unit & Hydraulic Acc.
19.HVI-22 Hydraulic Oil (Standard). 9
20.Standard Pump For PTO 1
21.Hot shift PTO for automatic transmission 1
Body
22.Altec Body to include a Burnsville Steel Service Body, Model #GS-108-60 (57) General
Service Body suitable for installation on truck cab-chassis with 60" clear CA.
1
23.Steel Body 1
24.Body Is To Be Built In Accordance With The Following Altec Standard Specifications: 1
A.Basic Body Fabricated From A40 Grade 100% Zinc Alloy Coated Steel.
B.All Doors Are Full, Double Paneled, Self-Sealed With Built-In Drainage For
Maximum Weather-Tightness. Stainless Steel Hinge Rods Extend Full Length Of
Door.
C.Heavy-Gauge Welded Steel Frame Construction.
D.Integrated Door Header Drip Rail At Top For Maximum Weather Protection.
E.Fender Panels Are Either Roll Formed Or Have Neoprene Fenderettes
Mechanically Fastened.
F.Steel Treated For Improved Primer Bond And Rust Resistance.
G.Automotive Type Non-Porous Door Seals Fastened To The Door Facing.
H.B-Line Channel Installed In Compartments
Quote Number:697137 - 1
Altec, Inc.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Page 3 of 11
Item Description Qty Price
25.Smooth Galvanneal Steel Floor 1
26.Custom Body Type General Service Line Body 1
27.Finish Paint Body Altec White 1
28.Undercoat Body 1
29.108'' Estimated Body Length (Engineering To Determine Final Length) 1
30.94'' Body Width 1
31.Custom Body Compartment Height 43 inches 1
32.Custom Body Compartment Depth 18 inches deep 1
33.5.5 Inch Drop-In Wood Cargo Retaining Board At Rear Of Body 1
34.Gripstrut On Streetside Compartment Tops - to be painted Safety Yellow 1
35.Gripstrut On Curbside Compartment Tops - to be painted Safety Yellow 1
36.Custom Body Lighting LED Rope lighting wired to individual sealed pull on/push off
switch for each compartment
6
37.Stainless Steel T-Handle Three-Point Latches With Locks for all compartment doors
where possible. Single or 2-point latches will be acceptable where 3-point latches
cannot be installed.
6
38.All Locks Keyed Alike Including Accessories (Preferred Option) 1
39.Standard Master Body Locking System (Standard Placement Is At Rear. Sidepacks
With A Throughshelf/Hotstick Door At Rear, Standard Placement Is At The Front) with
handle and hasp installed one each side at front of body
6
40.Gas Shock (Gas Spring) Rigid Door Holders On All Vertical Doors 1
41.Chains On All Horizontal Doors 1
42.Two Chock Holders In Fender Panel On Curbside Of Body to include two (2) wheel
chock holders: installed in the curbside fender panel, one (1) in front and one (1) behind
the rear axle. Chock holders to include a drain holes with splash guards.
Chock holders to be designed to hold one (1) Worden HWC6YWH wheel chock in each.
Wheel chock dimensions: 6"H x 6"W x 10"L (refer to image in Teamcenter)
1
43.1st Vertical (SS) - Adjustable Shelf With Removable Dividers On 4'' Centers 3
44.Custom 1st Vertical (SS) Compartmentation to include a 34in wide vertical with the
following compartmentation:
- vertical unistrut installed on both sides of compartment for the installation of the
shelves.
- horizontal unistrut installed at the top of the compartment on the sides and back wall.
Approximately 4in below the compartment top.
1
45.1st Horizontal (SS) - Adjustable Shelf With Removable Dividers On 4'' Inch Centers 2
Quote Number:697137 - 1
Altec, Inc.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Page 4 of 11
Item Description Qty Price
46.Custom 1st Horizontal (SS) Compartmentation to include a 46in wide horizontal
compartment with the following compartmentation:
- vertical unistrut installed on both sides of compartment for the installation of the
shelves.
1
47.Rear Vertical (SS) - Locking Swivel Hooks On An Adjustable Rail - Left Wall 2
48.Rear Vertical (SS) - Locking Swivel Hooks On An Adjustable Rail - Rear Wall 4
49.Rear Vertical (SS) - Locking Swivel Hooks On An Adjustable Rail - Right Wall 2
50.Custom Rear Vertical (SS) Compartmentation to include a 28" wide vertical with the
following compartmentation:
- vertical unistrut installed on both sides of compartment.
- horizontal unistrut installed at the top of the compartment on the sides and back wall.
Approximately 4" below the compartment top.
1
51.1st Vertical (CS) - Adjustable Shelf With Removable Dividers On 4'' Centers 2
52.1st Vertical (CS) - Louvered Panel On Rear Wall To Ventilate Compartment 1
53.Custom 1st Vertical (CS) Compartmentation to include a 34in wide vertical with the
following compartmentation:
- two (2) adjustable 4"H drawers with thumb latches installed on Grant-slides. Drawers to
include removable dividers installed 4in O.C. Drawers to have top-opening lid (for writing
surface) installation hardware installed inside the enclosure.
- 2,400 W inverter installed on the floor on hat section. louvers on the bottom back side
of the compartment.
- vertical unistrut installed on both sides of compartment for the installation of the
shelves and drawers.
Note: Ensure that there is no paint on any of the slides/rails
1
54.1st Vertical (CS) - Inverter Storage Inside Of Body Compartment With Guard And
Provisions For Remote GFCI Receptacle (Mounted On Top Shelf Unless Otherwise
Specified)
1
55.1st Vertical (CS) - Battery Storage Inside Of Body Compartment 1
56.1st Horizontal (CS) - Adjustable Shelf With Removable Dividers On 4'' Centers 2
57.1st Horizontal (CS) - Louvered Panel On Rear Wall To Ventilate Compartment 1
58.Custom 1st Horizontal (CS) Compartmentation to include a 46in wide horizontal
compartment with the following compartmentation:
- vertical unistrut installed on both sides of compartment for the installation of the
shelves.
1
59.Rear Vertical (CS) - Adjustable Shelf With Removable Dividers On 4'' Centers 2
60.Custom Rear Vertical (CS) Compartmentation to include a 28in wide vertical with the
following compartmentation:
- vertical unistrut installed on both sides of compartment.
- horizontal unistrut installed at the top of the compartment on the sides and back wall.
Approximately 4in below the compartment top.
1
61.30'' L Steel Tailshelf, Width To Match Body 1
Quote Number:697137 - 1
Altec, Inc.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Page 5 of 11
Item Description Qty Price
62.Steel U-Shaped Grab Handle Installed on Tailshelf CS 1
63.Steel Storage Box Built Into Streetside Of Tailshelf, With Drop Down Door And Keyed
Latch. If Cross Storage Is Also Required, One Door Will Be Used To Access Both - to
include two (2) drain holes with splash guards in transverse compartment.
1
64.Steel Recessed Gripstrut Side Access Steps On Curbside Of Tailshelf 1
65.Smooth Galvanneal Steel Tailshelf 1
66.Small Steel Grab Handle Installed At Rear 1
67.Additional Body Option to include one (1) Fuel Filler Assembly installed streetside 1
68.Additional Body Option All uni-strut mounted hooks should be constructed as follows
(SCE Style):
- Hooks should be designed and built to hold a 50 lbs dynamic load without breaking or
deforming.
- Hook should have a 5" diameter throat
- Hook, when installed should not extend more than 7" below the bottom of the uni-strut
rail.
1
69.Additional Body Option bolt body to chassis in 6 places. (Like SCE BC324) Rear to be
rigid mounts, center and forward to be spring mounts. To include reinforcing the body
mounts to eliminate the body mounts breaking/tearing out.
1
70.Additional Body Option All boxes are to include drain holes.1
71.Additional Body Option All compartments, top opening boxes, and tailshelf
compartments to have Dri-Dek installed on floor
1
72.Additional Body Option All box handles are to be installed on the front face of the box,
not on the top to help eliminate trip hazards.
1
73.Additional Body Option All top opening boxes should have a piano type hinge and
locking hasp mounted on front face of box and link mounted to the box lid.
1
74.Additional Body Option Top Boxes to be mounted on Uni-strut 1
75.Additional Body Option Ensure that the body long runners and outer cross members are
structural channel not formed channel.
1
76.Additional Body Option shelves should be a minimum of 2"H and capable of mounting to
unistrut in a horizontal position or tilted from approximately 0 to 15 degrees.
1
77.Additional Body Option minimum 7 gauge treadplate floor 1
Body and Chassis Accessories
78.ICC Underride Protection 1
79.Receiver Hitch, 2'', Class 3 1
80.Set Of D-Rings for Trailer Safety Chain, installed one each side of towing device mount. 1
Quote Number:697137 - 1
Altec, Inc.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Page 6 of 11
Item Description Qty Price
81.Front Torsion Bar Installed On Chassis 1
82.Rear Torsion Bar Installed On Chassis installed over-frame at rear axle.1
83.Send Out for Spring Build Up Add leaf spring to the rear 1
84.Timbren Springs for Front Suspension 1
85.Appropriate counterweight added for stability. 1
86.Custom Access Step to include a four (4) ply rubber mounted gripstrut access step
installed below the curbside access steps. Note: Ensure that the rubber is 4 ply material
and that button head bolts are used the the nuts to the outside, no exceptions. Offset
outboard by 2".
1
87.Custom Material Rail to include unistrut railing installed as follows:
- Three (3) 108"L unistrut rails.
One (1) installed in bed area on CS top box
One (1) installed in bed area on CS body
One (1) streetside at top of body.
- Two (2) 28 1/2"L unistrut rails. One (1) rail installed on rear-most edge of tailshelf,
streetside, and one (1) installed 28" forward.
- Two (2) horizontal unistrut rails installed on the raised section of the transverse
compartment in the tailshelf.
- Two (2) vertical unistrut rails installed on the forward wall of the transverse
compartment in the tailshelf.
Material rails to include the following hooks/pegs for installation on the rails:
- Sixteen (16) SCE style galvanized swivel hooks for Unistrut installation.
- Six (6) double material pegs 6"L x 3"W for installation on the uni-strut. Rated for 75lb
capacity. Pegs to include end-cap lip and should be horizontal (not angled up like past
builds).
- Six (6) single material pegs 6"L for installation on the uni-strut. Rated for 30lb capacity.
Pegs to include end-cap lip and should be horizontal (not angled up like past builds).
- Provide sixteen (16) uni-strut nuts in addition to the nuts provided with the hooks and
pegs.
1
88.Platform Rest, Rigid with Rubber Tube 1
89.Platform to be side stowed 1
90.Boom Rest for a Telescopic Unit cantilevered boom rest installed offset to the street
side. Boom rest to include an over center type boom hold down strap installed on boom
rest. Hold down strap to be bolted to rest, not welded.
1
91.Mud Flaps With Altec Logo (Pair) 1
92.Custom Wheel Chocks Worden Model: HWC6YWH
Material: Aluminum
Size: 6"H x 6"W x 10"L
1
93.Slope Indicator Assembly For Machine Without Outriggers 1
94.Custom Cone Holder to include an SCE style fold over cone holder installed streetside
rear of tailshelf, in front of strobe light.
1
Quote Number:697137 - 1
Altec, Inc.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Page 7 of 11
Item Description Qty Price
95.Custom Ladder Storage to include a false-floor type ladder storage area built into the
cgo floor.
- Length to accommodate a 12'L x 18"W x 5"D Ladder
- Snap chain (for ladder retention during travel)
- Drain holes at front corners, with splash guard below drain holes
- Plastic slide pads with chamfered edges installed at opening
- Top reinforced for personnel handling
1
96.Additional Horizontal Storage Box 1 108"L x 18"W x 10"H installed on the curbside
compartment top with the following configuration:
- Drain holes in the box.
- Box must clear aerial unit rotation.
- Center divide for compartment support
- two (2) top opening top hinged doors with gas shocks with grab-handle and pad
lockable draw latch. Keyed to match body
- door handle depth minimized, to reduce protrusion in cargo area
1
97.Custom Hotstick Box 108"L x 18"W x 10"H installed on the streetside compartment top
with the following configuration:
- Rear drop down door. Should drop down all the way.
- (2) Top opening lids with grip strut
- Shelf installed to provide "false bottom" for top opening storage
- 3" below shelf will be for hot sticks to be pulled out from rear
- hot stick area to be lined with Dri-Deck
- Drain holes in the box.
1
98.10 LB Fire Extinguisher With Heavy Duty Bracket, Shipped Loose 1
99.Triangular Reflector Kit, Installed shipped loose in the first vertical street side.1
100.Vinyl manual pouch for storage of all operator and parts manuals 1
101.Vise, Utility, 6.5 IN Jaw with 5.5 IN Opening, Pipe Jaws, with Replaceable Jaws and
Swivel base with removable base. Installed on tailshelf
1
Electrical Accessories
102.Custom Lighting Package Lights and Reflectors installed per FMVSS as follows:
- Four (4) S/T/T Lamps, LED - Truck Lite #44092R; two (2) installed each side of tailshelf
rear face.
- Two (2) 2" Red Marker Lamps, LED - Truck Lite #30050R; one (1) installed each side
of tailshelf.
- Four (4) Red Reflectors - Truck Lite #98035R; one (1) installed
each side on outer corners and rear face of tailshelf.
- Two (2) Forward Amber Lamps, LED - Truck Lite #30050Y; one (1)
installed each side at front of service body.
- Two (2) Mounting Bracket - branch-deflector type
- License plate lamp, LED, Truck Lite #15040
1
103.Custom Strobe Light to include three (3) Federal Signal, #100 strobes (95fpm with spare
bulb) installed as follows:
- one (1) installed streetside rear of tailshelf (by rear-most edge).
- two (2) installed on front of body light bar, one (1) each side. (note go light and strobes
should have enough wire to allow there positions to be swapped)
1
Quote Number:697137 - 1
Altec, Inc.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Page 8 of 11
Item Description Qty Price
And four (4) Federal signal 4" round rubber grommet mounted "Signal Master"
#607123-02 lights installed as follows:
- two (2) installed in the rear fender panel, one (1) each side offset to the rear.
- one (1) installed in the street side rear light panel inboard of the back-up lights.
- one (1) installed on light mounting bar facing forward.
104.Custom Light Bar to include a Federal Signal "Signal Master" #321722 84"L LED light
bar with integral marker lights.. Light bar to be recessed into the tailshelf and wired to
controller in the cab. Controller location to be determined.
- light bar to wired so that its only "ON" when the four (4) amber warning lights are
operating
1
105.Custom Flood Light to include one (1) Truck Lite LED flood lamp (ref. Truck Lite #80378
except LED) installed on inboard side of boom rest post so light can be swiveled to the
front and the rear. Light to be wired to work light switch in cab.
1
106.Custom Remote Spot/Flood to include Go Light Stryker HID #30201 lights installed one
(1) each side of the of the SCE light bar. Each light to have a dash mounted controller
installed in the cab and a wireless handheld controller. (note go light and strobes should
have enough wire to allow there positions to be swapped)
2
107.Single tone back up alarm installed between the chassis frame rails at the rear of the
chassis. To work in conjunction with chassis reverse drive system
1
108.Altec Backup Camera System, 7'' Color LCD Monitor, Heated Infrared Camera with
Day/Night Sensor and Audio Monitor installed on dash.
Camera installed at rear.
1
A.7'' Color LCD Monitor With LED Backlighting And Proximity Indicators
B.2 Inputs With Independent Triggers
C.Heated Infrared Camera With Day/Night Sensor And Audio
D.Mirror/Normal View
E.IP68 Rated
F.Wide Viewing Angle (104 Degrees Horizontal x 78 Degrees Vertical)
G.20 Meter Cable Assembly
109.PTO Hour Meter, Digital, with 10,000 Hour Display installed in chassis cab.1
110.Deep Cycle Auxiliary Battery For Vented Applications (Group 31) CS 1st vertical 2
111.Custom Electric Trailer Plug Cole Hersee 1235-BX 6-Pole Socket with protective
housing.
1
112.Ford Upfitter Switches (Supplied with Chassis) 1
113.Inverter, 2400 Watt, Pure Sine Wave, 120 VAC (Sensata #12/2400N) Installed in the
curb side first vertical
1
114.Inverter Wired Battery Hot with Dash Mounted Switch 1
115.12 Volt Receptacle (Cigarette Lighter Style), Weatherproof female 12-VDC cigar type,
one (1) installed in curbside first vertical, top left corner, one (1) installed in curbside
horizontal, top right corner adjacent to 110-VAC outlets.
Note: Wire gauge needs to be sized to allow 20-amp capacity for air-blower operation at
2
Quote Number:697137 - 1
Altec, Inc.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Page 9 of 11
Item Description Qty Price
all receptacles.
116.120 Volt GFCI Receptacle Includes Weather-resistant Enclosure to include six (6) GFCI
protected outlets, one (1) installed at each corner of service body, one (1) installed in
curbside first vertical, top left corner, one (1) installed in curbside horizontal, top right
corner. All exterior outlets to be hardwired to the output of the inverter and to include
1/8" drain holes in the bottom of the box.
6
117.12,000LB Electric Winch Kit for use in conjunction with a Ford Super Duty series
chassis. To include a hidden mount assembly with an emergency stop switch.
1
118.Power Distribution Module 6 Is A Compact Self-Contained Electronic System That
Provides A Standardized Interface With The Chassis Electrical System. (Includes
Operator's Manual)
1
119.Install Remote Start/Stop system in Final Assembly. 1
120.Install secondary stowage system. 1
121.Boom Out Of Stow Indicator For Lower Boom with proximity switch installed on boom
rest. 12V signal out.
1
Finishing Details
122.Powder Coat Unit Altec White 1
123.Finish Paint Body Accessories Above Body Floor Altec White 1
124.Finish Paint Body Compartment Interiors Altec White 1
125.Altec Standard; Components mounted below frame rail shall be coated black by Altec.
i.e. step bumpers, steps, frame extension, pintle hook mount, dock bumper mounts,
D-rings, receiver tubes, accessory mounts, light brackets, under-ride protection, etc.
Components mounted to under side of body shall be coated black by Altec. i.e. Wheel
chock holders, mud flap brackets, pad carriers, boxes, lighting brackets, steps, and
ladders.
1
126.Custom paint. to include painting all steps and grab handles safety yellow. Steps that
would have martex on them should have yellow martex installed. There should also be
yellow martex installed on the cargo floor just above the top step sized to match the step
area below.
1
127.Apply Non-Skid Coating to all walking surfaces 1
128.English Safety And Instructional Decals 1
129.Vehicle Height Placard - Installed In Cab 1
130.Placard, HVI-22 Hydraulic Oil 1
131.Dielectric test unit according to ANSI requirements. 1
132.Stability test unit according to ANSI requirements. 1
133.Focus Factory Build 1
Quote Number:697137 - 1
Altec, Inc.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Page 10 of 11
Item Description Qty Price
134.Delivery Of Completed Unit 1
135.Inbound Freight 1
136.AT40G FA Installation 1
Chassis
137.Chassis 1
138.Altec Supplied Chassis 1
139.2021 Model Year 1
140.Ford F550 1
141.4x2 1
142.60 Clear CA (Round To Next Whole Number) 1
143.Regular Cab 1
144.Chassis Cab 1
145.XLT Trim Package 1
146.Chassis Color - White 1
147.Chassis Wheelbase Length - 145 1
148.Ford Gas 7.3L 1
149.Gas 1
150.430 HP Engine Rating 1
151.Ford Torqshift 10-Speed Automatic Transmission (w/PTO Provision) 1
152.GVWR 19,000 LBs 1
153.6,500 LBS Front GAWR 1
154.Spring Suspension 1
155.13,660 LBS Rear GAWR 1
156.225/70R19.5 Front Tire 1
157.225/70R19.5 Rear Tire (Traction) 1
158.Hydraulic Brakes 1
159.Park Brake In Rear Wheels 1
160.Ford E/F250-550 Single Horizontal Right Side Exhaust 1
Quote Number:697137 - 1
Altec, Inc.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Page 11 of 11
Item Description Qty Price
161.63C - Aft Axle Frame Extension 1
162.No Idle Engine Shut-Down Required 1
163.50-State Emissions 1
164.Ford 40 Gallon Fuel Tank (Rear) 1
165.AM/FM Radio 1
166.Air Conditioning 1
167.Keyless Entry 1
168.Power Door Locks 1
169.Power Windows 1
170.Spare Tire 1
171.Other Exterior Cab Options black running boards 1
172.Cloth Split Bench Seat Seating Capacity: 3
40-20-40 split-bench
Center Armrest
1
Additional Pricing
173.Standard Altec Warranty: One (1) year parts warranty, one (1) year labor warranty,
ninety (90) days warranty for travel charges, limited lifetime structural warranty
1
Unit / Body / Chassis Total
Taxes @ 10.25%
Delivery
DMV Registration Fee
Total
145,790.00
Altec Industries, Inc.
BY
Brooklyn Ryan Russell
Notes: