HomeMy WebLinkAboutE-3.1. Approve Purchase of Freightline TruckCONSENT CALENDAR E-3
TO: HONORABLE CHAIRPERSON AND MEMBERS OF THE AZUSA UTILITY
BOARD
FROM: TIKAN SINGH, GENERAL MANAGER
DATE: JULY 25, 2022
SUBJECT: APPROVE THE PURCHASE OF A 2023 FREIGHTLINER TRUCK FOR
ELECTRIC OPERATIONS
BACKGROUND:
The Electric Division’s existing Freightliner truck is now 22 years old and is currently budgeted
for replacement due to heavy wear. In addition, Azusa Light & Water (ALW) is phasing out
heavy-duty vehicles powered by diesel fuel on its fleet to be in compliance with regulatory
agencies such as the California Air Resources Board (CARB) and the Air Quality Management
District (AQMD). As such, Staff recommends the purchase of a new Compressed Natural Gas
(CNG) Freightliner truck for Electric Operations. The purchase of this truck was budgeted for
$496,125 under Capital Outlay for FY 2022-23. However, Staff received a price proposal for this
heavy-duty vehicle in the amount of $636,226.82. Therefore, Staff recommends increasing this
purchase budget by $140,101.82 to cover the cost of the truck.
The proposed actions waive the competitive purchase requirements pursuant to the Azusa
Municipal Code Section 2-521(a), Article VII, to amend the budgeted amount by $140,101.82,
and authorize a Purchase Order in an amount not to exceed $636,226.82 for a Freightliner truck.
RECOMMENDATION:
Staff recommends the Utility Board take the following action:
1)Approve an amendment to the Fiscal Year 2022/23 Capital Outlay from $496,125 to
$636,226.82; and
2)Waive the competitive purchase requirements pursuant to Section 2-521(a), Article
VII, Chapter 2 of the Azusa Municipal Code (Cooperative and Piggyback Purchasing);
and
Approved
Utility Board
07/25/2022
Approve Purchase of Freightliner Truck for Electric Operations
July 25, 2022
Page 2
3) Approve the purchase of one (1) new 2023 CNG Freightliner truck; and
4) Authorize the issuance of a Purchase Order to Terex Utilities, Inc. in the amount not to
exceed $636,226.82.
ANALYSIS:
The Electric Division uses the Freightliner truck (# LT 710) to perform essential task such as
setting poles, installing pad mount transformers, pulling underground cables, and performing other
heavy lifting power line work. Truck # LT 710 is 22 years old and is at the end of its useful life.
It has man y ongoing maintenance issues including finding obsolete replacement parts. In addition,
LT 710 is powered by diesel fuel, which deems to be banned from operations in the near future.
Furthermore, CARB and AQMD are actively imposing stringent regulations on heavy-duty
vehicles fueled by diesel fuel. Thus, replacing LT 710 with one powered by CNG fuel will not
only address maintenance issues, but will also put our fleet in a more aligned position with
regulatory compliances. As such, Staff solicited and received a proposal for the new Freightliner
truck from Terex Utilities, Inc. Staff has reviewed the proposal and has determined that it has met
all the specifications and requirements.
Staff recommends waiving competitive purchasing requirements and utilizing the bid received via
the nationwide bidding cooperative, Sourcewell (formerly NJPA), which includes Terex Utilities,
Inc. as a vehicle provider.
FISCAL IMPACT:
The fiscal impact of this purchase is $636,226.82. This purchase was originally budgeted in the
FY 2022-23 for $496,125 under Account No. 33-40-733-920-7135. An increase of $140,101.82
to Account No. 33-40-733-920-7135 is required.
Prepared by: Reviewed and Approved:
Dave Patterson Hien K. Vuong
Electric Distribution Supervisor Assistant General Manager
Electric Operations
Reviewed and Approved:
Tikan Singh
General Manager
Approve Purchase of Freightliner Truck for Electric Operations
July 25, 2022
Page 3
Reviewed and Approved:
Sergio Gonzalez
City Manager
Attachment:
1) Proposal from Terex Utilities, Inc.
Sourcewell 2022 Pricing 110421‐TER
Date: 7/15/2022 (Revision 1)
Quote Number: QU22344 Unit: C6060
CITY OF AZUSA LIGHT & WATER
729 NORTH AZUSA AVENUE
AZUSA, CA 91702
(626) 812‐5172
Attention: HIEN VUONG
Baseline Price: $534,377
FET Tax If Applicable $25,831
Grand Total Each: $560,208
See Attached Options Page:
Notes:
1) Delivery Terms are: CPT Destination
2) Terms: Net 30 days
3) Delivery days from receipt of order shall be 360 +
Terex Utilities Inc.Accepted By:
____________________________________
Steve Fedt
Sales Coordinator PO Number: _________________________
Albert Gutierrez Quantity: ___________________________
Account Manager
Grand Total:_________________________
Date:_______________________________
CUSTOMER ORDER ACKNOWLEDGEMENT
Terex Utilities, Inc. ‐ 3140 15th Avenue SE ‐ Watertown, SD 57201 ‐ Phone: 605‐882‐4000
Buyer hereby agrees to purchase the products in this quotation, subject to acceptance by Seller. Buyer has read and agrees to
Seller's Terms and Conditions of Sale.
Prices are subject to change until shipment. Applicable taxes and surcharges to be added. Taxes, shipping, handling and lead times are estimates
and subject to change. Quoted prices are based on total package and subject to change if all items not purchased. All prices quoted are in U.S.
dollars unless otherwise specified. Payment by cash or certified check only. Chassis price based off current pricing available at time of quote.
Pricing is subject to change based on vehicle sourcing; final price to be confirmed prior to time of invoice. Quote withdrawn after 30 days.
Please ensure the accuracy of the specifications and drawings you provide. Changes made after receipt of order may incur additional charges. If
you are trading equipment in, you warrant that: You have good title to the trade-in; it is free of all liens and encumbrances; all information you have
provided related to the trade-in is true and correct.
Terex purchased chassis through Terex preferred International Dealer will include at no additional cost a special tow package for 12
months/unlimited mileage to nearest International Dealership for a warrantable failure. Coverage limited to $550 per incident. Roadside assistance
call 1-800-448-7825
Terex purchased chassis through Terex preferred Freightliner Dealer will include at no additional cost a special tow package for 12
months/unlimited mileage/KM extended towing coverage $550 cap FEX applies. Roadside assistance call 1-800-FTL-HELP
No. Selling Price Options:
1 $19,270
2 $0
3 $0
4 $0
5 $0
6 $0
7 $0
8 $0
9 $0
10 $0
11 $0
12 $0
13 $0
14 $0
Total:
Options
7/15/22
Quote(s) #QU22344
Customer Name
Customer PO #
Date
CITY OF AZUSA LIGHT & WATER
Digger, Auger and Associated Items:
* As per the attached Alternate Quote #QU22438.
Description
Add Option
Add Option
Add Option
Add Option
Add Option
Add Option
Add Option
Add Option
Add Option
Add Option
Add Option
Add Option
Add Option
Add Option
2 - Terex Utilities, Inc. Terms and Conditions of Sale, U.S. and Canada (except Quebec), Rev. 15 March
2021
TERMS AND CONDITIONS OF SALE
TEREX SOUTH DAKOTA, INC./TEREX UTILITIES, INC.
U.S. and CANADA (except Quebec)
1. Terms and Conditions. The provision by Seller to Buyer of any Equipment or Parts (collectively referred to as “Products”)
shall be exclusively governed by these Terms and Conditions of Sale (“Terms and Conditions”) and Seller’s sales order
acknowledgement (collectively referred to as “Agreement”). This Agreement cancels and supersedes any and all terms and
conditions previously issued by Seller and shall remain in effect unless and until superseded in writing by Seller. Acceptance of
an order for Products by Seller shall be deemed to constitute a binding agreement between the parties pursuant to these Terms
and Conditions and Buyer agrees that the order may not thereafter be countermanded or otherwise changed without the explicit
prior written consent of Seller. No other terms and conditions shall apply, including the terms of any purchase order submitted to
Seller by Buyer, whether or not objected to by Seller or whether or not such terms are inconsistent or conflict with or are in
addition to these Terms and Conditions. These Terms and Conditions shall be deemed accepted by Buyer if any of the following
occurs: (i) if confirmed by Buyer, (ii) if undisputed by Buyer within ten (10) days after receipt, or (iii) if Seller delivers Products to
Buyer. Any communication construed as an offer by Seller and acceptance thereof is expressly limited to these Terms and
Conditions. The Products are intended for industrial/commercial use by professional contractors and their trained employees
and are not intended for use by consumers.
2. Terms of Payments. Payment for Products purchased by Buyer shall be made in accordance with any of the following terms,
provided they have been previously arranged with and expressly approved by Seller in writing: (1) cash in advance; (2)
confirmed, irrevocable letter of credit established in such amount and form and at such time and at such bank as shall be
approved by Seller in respect of each order; (3) credit account purchases for which payment will be due and payable on net
thirty (30) day terms, plus service and other charges applicable to past due amounts in accordance with Seller's written notices;
or (4) other payment arrangements expressly approved by Seller in writing prior to or at the time the order is placed. If any
Buyer credit account purchase is not paid in accordance with Seller's credit payment terms, in addition to any other remedies
allowed in equity or by law, Seller may refuse to make further shipments without advance payment by Buyer. Nothing contained
herein shall be construed as requiring Seller to sell any Products to Buyer on credit terms at any time, or prohibiting Seller from
making any and all credit decisions which it, in its sole discretion, deems appropriate for Seller. Seller shall have the right, at its
option, to charge interest on all amounts not paid when due and Buyer agrees to pay such interest calculated on a daily basis,
from the date that payment was due until the Seller receives payment in full, at the rate of 1.5% per month or the maximum rate
permitted by applicable law. Unless otherwise agreed in writing between Seller and Buyer, Seller may, in its sole discretion,
increase or decrease the price of any Product, as Seller deems reasonably necessary, at any time prior to shipment and invoice
Buyer for the same. If Buyer orders the chassis through Seller, the chassis payment is due upon receipt of chassis by Seller
and the balance owed for the completed unit is due in accordance with agreed upon payment terms. When supplied by
Buyer, Seller will inspect the chassis upon receipt and will notify Buyer of any chassis mounted components (including but
not limited to fuel tanks, air tanks, battery boxes and exhaust systems) that require relocation. Buyer will be invoiced for
such work upon completion of the finished Equipment.
3. Taxes and Duties. Unless otherwise noted, prices quoted do not include taxes or duties of any kind or nature. Buyer
agrees that it will be responsible for filing all tax returns and paying applicable tax, duty, export preparation charge and export
documentation charge resulting from the purchase of the Products. In addition, in the event any other similar tax is
determined to apply to Buyer's purchase of the Products from Seller, Buyer agrees to indemnify and hold Seller harmless
from and against any and all such other similar taxes, duties and fees. All prices quoted are U.S. dollars unless otherwise
specified. The amount of any present or future taxes applicable to the sale, transfer, lease or use of the Products shall be
paid by Buyer; or in lieu thereof, Buyer shall provide Seller with a tax exemption certificate satisfactory to the applicable
taxing authority proving that no such tax is due and payable upon such sale, transfer, lease or use.
4. Title, Property, Risk and Delivery. Unless otherwise stated in writing, for all intra-continental United States shipments, all
prices and delivery are FCA, point of manufacture (Incoterms 2020); for all other shipments, all prices and delivery are FAS,
named port of shipment (Incoterms 2020). Title and all risk of loss or damage to Products shall pass to Buyer upon delivery, as
per Incoterms 2020. Any claims for loss, damage or delay in transit must be entered and prosecuted by the Buyer directly with
the carrier, who is hereby declared to be the agent of the Buyer. Seller shall not be liable for any delay in performance of this
agreement or delivery of the Products, or for any damages suffered by Buyer by reason of delay, when the delay is caused,
directly or indirectly, by a force majeure event described in Section 20 herein or any other cause beyond Seller's control. Claims
for shortages in shipments shall be deemed waived and released by Buyer unless made in writing within five (5) days after
Buyer's receipt of shipment. Seller's responsibility for shipment shall cease upon delivery of the Products to the place of
shipment, and all claims occurring thereafter shall be made to or against the carrier by Buyer. Delivery shall generally be 240 to
270 days after receipt by Seller of a signed Order, provided that, where applicable: (1) Seller receives the chassis a
minimum of 90 days prior to scheduled delivery, (2) drawings are timely sent by Buyer and the approved drawings are
returned to Seller by Buyer by the requested date, (3) all vendor-supplied components and Buyer-supplied accessories are
received by Seller by the date necessary to comply with scheduled delivery. Seller shall not be liable for any delay in
performance of this agreement or delivery of the Products, or for any damages suffered by Buyer by reason of delay, when the
delay is caused, directly or indirectly, by a force majeure event described in Section 20 herein or any other cause beyond
3 - Terex Utilities, Inc. Terms and Conditions of Sale, U.S. and Canada (except Quebec), Rev. 15 March
2021
Seller's control. Claims for shortages in shipments shall be deemed waived and released by Buyer unless made in writing
within fifteen (15) days after Buyer's receipt of shipment. Seller's responsibility for shipment shall cease upon delivery of the
Parts and or Equipment to the place of shipment, and all claims occurring thereafter shall be made to or against the carrier
by Buyer.
5. Delays Caused By Buyer. In the event of a delay in shipment or delivery due to delay by Buyer in furnishing delivery
instructions, arranging a method of payment satisfactory to Seller, submitting valid import permits or licenses, or any other delay
caused by Buyer or at Buyer’s request, if the Products are not shipped or delivered within five (5) days from the first date they
are ready to be shipped or delivered, then Seller shall be entitled to charge, as compensation, any additional costs incurred
related to such delay. If the Products are not shipped or delivered by the date which is ten (10) days from the first date they are
ready to be shipped or delivered, then Buyer’s order shall be deemed cancelled and Seller may, in its sole discretion, sell such
Products to another buyer without any liability or responsibility to Buyer whatsoever. Seller shall have the right to keep payments
on account already received from Buyer, and the difference between the sales price (increased by any other and all further
costs, including but not limited to attorney’s fees and expenses, storage and other costs, and interest accrued thereon) and the
price received from another buyer shall constitute a debt of Buyer and bear interest at the same rate set forth in Section 2
herein. Seller shall be entitled to claim for any further damages suffered as a consequence of Buyer's breach of its obligations
hereunder.
6. Cancellation. Prior to delivery to place of shipment, a Product order may be cancelled only with Seller's prior consent and
upon terms indemnifying Seller from all resulting losses and damages. Seller shall have the right to cancel and refuse to
complete a Product order if any term and/or condition governing this agreement is not complied with by Buyer. In the event of
cancellation by Seller, or in the event Seller consents to a request by Buyer to stop work or to cancel the whole or any part of
any order, Buyer shall, in the event that Seller asks Buyer to do so, make reimbursement to Seller, as follows: (i) any and all
work that can be completed within thirty (30) days from date of notification to stop work on account of cancellation shall be
completed, shipped and paid in full; and (ii) for work in progress and any materials and supplies procured or for which definite
commitments have been made by Seller in connection with the order, Buyer shall pay such sums as may be required to fully
compensate Seller for actual costs incurred, plus fifteen percent (15%). Buyer may not cancel any order after Seller's delivery to
place of shipment. Orders for "Special" Equipment may not be cancelled after acceptance, except by Seller. Items of "Special"
Equipment are those that differ from standard Seller specifications, have a limited market, or incorporate specifications that have
been determined for a specific application. Determination of whether an item of Equipment is “Special” shall be made by Seller
in its sole discretion.
7. Inspection and Acceptance. Buyer agrees that it shall inspect the Products immediately after receipt and promptly (in no
event later than fifteen (15) days after receipt) notify Seller in writing of any non-conformity or defect. Buyer further agrees that
failure to give such prompt notice or the commercial use of the Products shall constitute acceptance. Acceptance shall be final
and Buyer waives the right to revoke acceptance for any reason, whether or not known by Buyer at the time of such acceptance.
The giving of any such notice by Buyer shall automatically cause the provisions of Seller’s warranty to apply and govern the
rights, obligations and liabilities of the parties with respect to such nonconformity or defect, provided under no circumstances
shall rejection give rise to any liability of Seller for incidental or consequential damages or losses of any kind. Seller shall not be
bound by any agent's, employee’s or any other representation, promise or inducement not set forth herein. Seller’s catalogues,
technical circulars, price lists, illustrations, drawings and any other similar literature are for Buyer’s general guidance only and
the particulars contained in them shall not constitute representations by Seller and Seller shall not be bound by them.
8. Warranty for New Products. Seller warrants its new Equipment and Parts manufactured and sold worldwide, to be free,
under normal use and service, of any defects in material or workmanship for a period of twelve (12) months from the date of
delivery (as limited by Seller’s Limited Product Warranty); provided that Buyer sends Seller written notice of the defect within
thirty (30) days of its discovery and establishes that: (i) the Equipment has been operated and maintained in strict
compliance with Seller’s operating and maintenance manuals ; and (ii) the defect did not result in any manner from the
intentional or negligent action or inaction of Buyer, its agents or employees and (2) a new machine registration certificate
has been completed, signed and delivered to the Seller within thirty (30) days of the Equipment’s “in-service” date. If
requested by Seller, Buyer must return any defective Product to Seller's manufacturing facility, or other location designated
by Seller, for inspection, and if Buyer cannot establish that conditions (i) and (ii) above have been met, then this warranty
shall not cover the alleged defect. Failure to give written notice of defect within such period shall be a waiver of this warranty
and any assistance rendered thereafter shall not extend or revive it. Accessories, assemblies and components included in
the Products of Seller, which are not manufactured by Seller, are subject to the warranty of their respective manufacturers.
This warranty shall not cover any item on which serial numbers have been altered, defaced or removed. Maintenance and
wear parts are not covered by this warranty and are the sole maintenance responsibility of Buyer. This warranty is limited to
the original purchaser or end-user if sold to a distributor, and is not assignable or otherwise transferable without written
agreement of Seller. THIS WARRANTY IS EXPRESSLY IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE) AND ALL OTHER OBLIGATIONS OR LIABILITY ON SELLER'S PART. THERE ARE NO
WARRANTIES THAT EXTEND BEYOND THE LIMITED WARRANTY CONTAINED HEREIN. Seller neither assumes nor
authorizes any other person to assume for Seller any other liability in connection with the sale of Seller's Products. This
4 - Terex Utilities, Inc. Terms and Conditions of Sale, U.S. and Canada (except Quebec), Rev. 15 March
2021
warranty shall not apply to any of Seller's Products or any part thereof which has been subject to misuse, alteration, abuse,
negligence, accident, acts of God or sabotage. No action by either party shall operate to extend or revive this limited
warranty without prior written consent of Seller.
9. Warranty for Used Equipment. Used Equipment sold hereunder is sold on an “AS IS, WHERE IS, WITH ALL
FAULTS” BASIS WITH NO WARRANTIES WHATSOEVER, EXCEPT AS TO TITLE, UNLESS OTHERWISE SPECIFICALLY
AGREED IN WRITING BY BUYER AND SELLER. SELLER ASSUMES NO RESPONSIBILITY FOR THE CONDITION,
SAFETY, LEGAL COMPLIANCE, OR USABILITY OF THE USED EQUIPMENT AND MAKES NO REPRESENTATION OR
WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO THE USED EQUIPMENT INCLUDING, WITHOUT LIMITATION,
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SELLER MAKES NO
REPRESENTATION OR WARRANTY REGARDING THE CONDITION OF THE USED EQUIPMENT, NOR THE
SUFFICIENCY OF ANY WARNINGS, INSTRUCTIONS OR MANUALS PROVIDED WITH THE USED EQUIPMENT. Seller
recommends and Buyer acknowledges that Buyer should contact the original manufacturer to obtain all available information for
the used Equipment, including but not limited to product manuals, warnings, safety bulletins, recall notices, and instructional
placards before using the used Equipment. Seller shall not be responsible for providing such information. Buyer agrees not to
assert any claims against Seller with respect to the used Equipment or its use. Buyer agrees that it shall inspect the used
Equipment prior to issuance of a purchase order for such Equipment and acknowledges that it is not relying upon any
photographs, images, videos, representations, statements or other assertions made by Seller with respect to the used
Equipment’s condition, but is relying upon its own knowledge and/or inspection of the used Equipment.
10. Remedies for Breach. IN THE EVENT OF ANY BREACH OF THE WARRANTY BY SELLER, THE PARTIES AGREE
THAT SELLER'S LIABILITY SHALL BE LIMITED EXCLUSIVELY TO THE REMEDIES OF REPAIR OR REPLACEMENT
(AT SELLER’S SOLE DISCRETION) OF ANY DEFECTIVE EQUIPMENT COVERED BY THE WARRANTY. In no event shall
any repair or replacement of any defective equipment covered by the Seller’s warranty extend the length of the warranty beyond
the period specified in Section 8 herein.
11. Limitation of Liability. NOTWITHSTANDING ANYTHING CONTAINED IN THIS AGREEMENT TO THE CONTRARY,
SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR, AND SPECIFICALLY DISCLAIM, ANY LIABILITY FOR ANY:
(A) LOST PROFITS AND/OR BUSINESS INTERRUPTION (WHETHER DIRECT OR INDIRECT); AND (B) INDIRECT,
INCIDENTAL, CONSEQUENTIAL (WHETHER DIRECT OR INDIRECT) OR OTHER DAMAGES OR LOSSES OF ANY KIND
WHATSOEVER, including, without limitation, labor costs, lost profits, loss of use of other equipment, third party repairs, personal
injury, emotional or mental distress, improper performance or work, penalties of any kind, loss of service of personnel, or failure
of Products to comply with any federal, state, provincial or local laws, regardless of whether arising from a breach of contract, or
warranty, legal claims or otherwise. Nothing in this Section shall operate to exclude Seller's liability for death or
personal injury when directly related to Seller’s negligent act or omission.
12. Limitation of Actions. Any action for breach of this agreement must be commenced within one (1) year after the cause
of action has accrued.
13. Specification Changes. In the event Seller incurs additional expense because of changes in specifications or drawings
previously approved by Buyer, or in the event Seller is required to modify the ordered Equipment, perform any additional
work or supply any additional Products, the additional expense shall be added to the purchase price. Buyer must submit to
Seller a revised purchase order specifying any and all requested changes. Upon receipt of Buyer’s revised purchase order,
Seller shall have the right, in its sole discretion, to accept or reject any changes in specifications requested by Buyer.
14. Trade-in Offers. Trade-in offers are subject to Seller’s inspection and acceptance of the equipment, which must have
been maintained to U.S. Department of Transportation operating and safety standards. All accessories on the equipment,
including without limitation jibs, winches, pintle hooks and trailer connectors, must remain with the equipment unless
otherwise agreed by Seller and Buyer in writing. Seller reserves the right to cancel any trade-in offers or agreements if these
conditions are not met, or if Buyer has misrepresented any information about the trade-in unit.
15. Insurance. Until the purchase price of any Products is paid in full, the Buyer shall provide and maintain insurance equal
to the total value of the Equipment delivered hereunder against customary casualties and risks; including, but not limited to
fire and explosion, and shall also insure against liability for accidents and injuries to the public or to employees, in the
names of Seller and Buyer as their interest may appear, and in an amount satisfactory to Seller. If the Buyer fails to provide
such insurance, it then becomes the Buyer's responsibility to notify the Seller so that the Seller may provide same; and the
cost thereof shall be added to the contract price. All loss resulting from the failure to affect such insurance shall be assumed
by the Buyer.
16. Patents, Copyrights, Trademarks, Confidentiality. No license or other rights under any patents, copyrights or
trademarks owned or controlled by Seller or under which Seller is licensed are granted to Buyer or implied by the sale of
Products hereunder. Buyer shall not identify as genuine products of Seller products purchased hereunder which Buyer has
treated, modified or altered in any way, nor shall Buyer use Seller's trademarks to identify such products; provided,
however, that Buyer may identify such products as utilizing, containing or having been manufactured from genuine products
5 - Terex Utilities, Inc. Terms and Conditions of Sale, U.S. and Canada (except Quebec), Rev. 15 March
2021
of Seller as treated, modified or altered by Buyer or Buyer's representative, upon prior written approval of Seller. All plans,
photographs, designs, drawings, blueprints, manuals, specifications and other documents relating to the business of Seller
("Information") shall be and remain the exclusive property of Seller and shall be treated by Buyer as confidential information
and not disclosed, given, loaned, exhibited, sold or transferred to any third party without Seller’s prior written approval;
provided, however, that these restrictions shall not apply to Information that Buyer can demonstrate: (a) at the time of
disclosure, is generally known to the public other than as a result of a breach of this Agreement by Buyer; or (b) is already in
Buyer's possession at the time of disclosure by from a third party having a right to impart such Information.
17. Default and Seller's Remedies. In the event of default by Buyer, all unpaid sums and installments owed to Seller, shall,
at Seller's sole option, become immediately due and payable without notice of any kind to Buyer. In addition to its right of
acceleration, Seller may pursue any and all remedies allowed by law or in equity, including but not limited to any and all
remedies available to it under the Delaware Uniform Commercial Code. In addition to the foregoing, and not in limitation
thereof, Seller shall have the right to set off any credits or amounts owed to Buyer against any amounts owed by Buyer to
Seller.
18. Indemnification by Buyer. Buyer hereby agrees to indemnify, release, defend and hold harmless Seller, its directors,
officers, employees, agents, representatives, successors, and assigns against any and all suits, actions or proceedings at law or
in equity (including the costs, expenses and reasonable attorney's fees incurred in connection with the defense of any such
matter) and from any and all claims demands, losses, judgments, damages, costs, expenses or liabilities, to any person
whatsoever (including Buyer's and Seller's employees or any third party), or damage to any property (including Buyer's property)
arising out of or in any way connected with the performance or the furnishing of Products under this agreement, regardless of
whether any act, omission, negligence (including any act, omission or negligence, relating to the manufacture, design, repair,
erection, service or installation of or warnings made or lack thereof with respect to any Products furnished hereunder) of Seller,
its directors, officers, employees, agents, representatives, successors or assigns caused or contributed thereto. If Buyer fails to
fulfill any of its obligations under this paragraph or this agreement, Buyer agrees to pay Seller all costs, expenses and attorney's
fees incurred by Seller to establish or enforce Seller's rights. The provisions of this paragraph are in addition to any other rights
or obligations set forth in this agreement.
19. Installation. Unless otherwise expressly agreed in writing, Buyer shall be solely responsible for the installation and
erection of the Products purchased. Although Seller may in some cases provide a serviceman, data and drawings to aid
Buyer with installation or start-up, Seller assumes no responsibility for proper installation or support of any Products when
installed and disclaims any express or implied warranties with respect to such installation and support. Notwithstanding
whether data and drawings are provided or a serviceman aids in the installation, Buyer shall indemnify and hold Seller
harmless and at Seller's request, defend Seller from all claims, demands or legal proceedings (including the costs,
expenses and reasonable attorney's fees incurred in connection with the defense of any such matter) which may be made
or brought against Seller in connection with damage or personal injury arising out of said installation or start-up.
20. Force Majeure. Seller shall not be liable to Buyer or be deemed to be in breach of this agreement by reason of any
delay in performing, or any failure to perform, any of Seller’s obligations in relation to the Products if the delay or failure was
due to any cause beyond the reasonable control of Seller including (without limitation) strike, lockout, riot, civil commotion,
fire, accident, explosion, tempest, act of God, war, epidemic, stoppage of transport, terrorist activity, supply shortage or
changes in government, governmental agency, laws, regulations or administrative practices.
21. Anti-Corruption; Export Controls; No Boycotts. Buyer agrees that it shall, and that any party retained or paid by the
Buyer (“Retained Party”) shall, comply with all applicable laws including, but not limited to, laws prohibiting public corruption
and commercial bribery. Buyer further agrees that it shall, and that any Retained Party shall, comply with all applicable
export controls, economic sanctions, embargoes and regulations regarding the export, re-export, shipment, distribution
and/or sale of Products, technology, information or warranty related services. Buyer further agrees that it shall not, and any
Retained Party shall not, export or re-export Products, technology, information or warranty related services directly or with
its knowledge indirectly into Iran, Sudan, Cuba, Syria, North Korea, the Crimea Region of the Ukraine or Russia without
Buyer first obtaining written approval from Seller. Failure to comply strictly with this section and all applicable laws,
regulations and licensing/approval requirements shall be grounds for immediate termination of this agreement by Seller.
Notwithstanding anything to the contrary contained in any agreement between the Buyer and Seller or in any other
document or agreement relating to the Products sold hereunder, Seller will not comply with requests related to the boycott
of any country or other jurisdiction, except to the extent such boycott is required by or otherwise not inconsistent with United
States law.
22. Telematics. If a telematics system is included with the Equipment, the telematics system is administered by a third party
(“Teleservice Provider”) and collects a range of operational data about the Equipment including, but not limited to, usage,
performance and reliability. Buyer consents to Seller’s obtaining such data from the Teleservice Provider for warranty,
product improvement, marketing and customer support purposes and to Seller’s management and reporting of data
(personal and non-personal) about the Equipment including, but not limited to, fuel consumption, up/down times, operation,
defects, parts replacement, movement and location. Buyer shall, to the extent required by applicable law, obtain consent
from its customers and/or any third party for Seller and/or third parties to provide teleservices and data to Buyer. Buyer shall
6 - Terex Utilities, Inc. Terms and Conditions of Sale, U.S. and Canada (except Quebec), Rev. 15 March
2021
comply with all applicable laws relating to the provision of teleservices. Buyer agrees to be bound by the current version of
the Terex Telematics Terms of Use at https://www.terex.com/en/products/telematics-tou.
23. Construction and Severability. These Terms and Conditions of Sale constitute the entire agreement between the parties
regarding the subject matter hereof and shall be construed and enforced in accordance with the laws of Delaware. The United
Nations Convention on Contracts for the International Sale of Goods (1980) (CISG) shall not apply. The invalidity or
unenforceability of any provisions of this agreement shall not affect any other provision and this agreement shall be construed in
all respects as if such invalid or unenforceable provision were omitted.
24. Jurisdiction. The parties agree that the proper and exclusive forum and venue in all legal actions brought to enforce or
construe any provisions herein shall be in United States District Court, District of Delaware or, if federal jurisdiction is lacking
in such action, in New Castle County Superior Court in Delaware.
25. No Assignment. No rights arising under this agreement may be assigned by the Buyer unless expressly agreed to in
writing by the Seller.
26. No Set-off. Buyer shall have no right to set-off any amounts it may owe Seller against amounts Seller may owe Buyer
under this or any other agreement between Buyer and Seller.
27. Miscellaneous. Buyer represents that: (i) it is solvent and has the financial ability to pay for the Equipment and Parts
purchased hereunder and (ii) it has all requisite right, power and authority to perform its obligations under this agreement.
Buyer’s Initials: ________________
LIMITED PRODUCT WARRANTY
TEREX Utilities, Inc. and TEREX South Dakota, Inc. (each a “Seller”), as to the equipment manufactured by each respective company, warrants its new equipment and parts manufactured and sold
worldwide to be free, under normal use and service, of any defects in manufacture or materials for a period of 12 months from date of delivery to the first end user, but in no event longer than 18
months from date of shipment from the factory; provided that (1) Seller receives written notice of the defect within thirty (30) days of its discovery and Buyer establishes that (i) the equipment has
been maintained and operated within the limits of rated and normal usage; and (ii) the defect did not result in any manner from the intentional or negligent action or inaction by Buyer, its agents or
employees, and (2) a new machine registration certificate has been completed and received by Seller within thirty (30) days of the equipment’s “in-service” date. If requested by Seller, Buyer must
return the defective equipment to Seller’s manufacturing facility, or other location designated by Seller, for inspection, and if Buyer cannot establish that conditions (1) (i) and (1) (ii) above have been
met, then this warranty shall not cover the alleged defect.
Seller’s obligation and liability under this warranty is expressly limited to, at Seller’s sole option, repairing or replacing, with new or remanufactured parts or components, any part which appears to
Seller upon inspection to have been defective in material or workmanship. Such parts shall be provided at no cost to the owner, FOB Seller’s parts facility (Incoterms 2010). If requested by Seller,
components or parts for which a warranty claim is made shall be returned to Seller at a location designated by Seller. All components and parts replaced under this warranty become the property of
Seller. This warranty shall be null and void if parts (including wear parts) or attachments other than genuine OEM Seller parts or approved attachments are used in or attached to the equipment.
Accessories, assemblies and components included in Seller’s equipment, which are not manufactured by Seller, are subject to the warranty of their respective manufacturers. Normal maintenance,
adjustments, or maintenance/wear parts, are not covered by this warranty and are the sole maintenance responsibility of Buyer.
The following structural members have a lifetime parts only warranty for the original Buyer after date of shipment from Seller: sub frame, pedestal, turntable, and boom. Replacement of fiberglass jibs,
seals, gaskets, hoses, and exterior coating is not covered under the lifetime warranty. The lifetime warranty requires an annual service inspection of the equipment by an authorized distributor of Seller.
The sub frame, pedestal, turntable, and boom shall have a 5 year parts only warranty if the annual service inspection is performed by an approved entity other than an authorized distributor of Seller.
All replacement parts must be genuine OEM Seller parts.
SELLER MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, AS TO THE
EQUIPMENT AND PARTS IT SUPPLIES.
No employee or representative of Seller is authorized to modify this warranty unless such modification is made in writing and signed by an authorized officer of Seller. Seller’s warranty is continuous for
the stated period, and “stopping and restarting” such period is not permitted.
Seller’s obligation under this warranty shall not include duty, taxes, environmental fees, including without limitation, disposal or handling of tires, batteries, petrochemical items, or any other charges
whatsoever. Seller shall not be liable for indirect, incidental, or consequential damages, even if advised of the possibility of such damages.
Improper maintenance, improper use, abuse, improper storage, operation beyond rated capacity, operation after discovery of defective or worn parts, accident, sabotage or alteration or repair of the
equipment by persons not authorized by Seller shall render this warranty null and void. Seller reserves the right to inspect the installation of the product and review maintenance procedures to
determine if the failure is covered under this warranty.
Parts Warranty: Seller warrants the parts ordered from the Seller to be free of defects in materials or workmanship for either (1) a period of 12 months after date of shipment from the factory, or (2) the
balance of the remaining new equipment warranty, whichever occurs first. With respect to parts ordered from Seller for equipment for which the warranty has expired, Seller warrants such parts to be
free of defects in materials or workmanship for a period of 12 months after date of shipment from the factory.
NO TRANSFERABILITY OF WARRANTY: This warranty is limited to the original purchaser or original end-user if sold to a distributor, and is not assignable or otherwise transferable without the
written agreement of Seller.
ITEMS NOT COVERED BY WARRANTY
The following listed items, which are not exhaustive, are NOT covered under this warranty:
1. Items sold by any individual, corporation, partnership or any other organization or legal entity that is not authorized by Seller to distribute its equipment.
2. Inbound freight, duty and taxes for replacement components or outbound freight, duty, and taxes for any part requested as a warranty return.
3. Components which are not manufactured by Seller or its affiliates. Such components may include, but are not limited to, chassis, engines, batteries, tires, customer-supplied products,
transmissions, air compressors, and axles.
4. Replacement of a complete assembly that is field repairable by the replacement or repair of defective part(s) within the assembly. Seller has the option to repair or replace any defective part or
assembly.
5. Wear parts and maintenance services including, but not limited to: lamps, lenses, seals, gaskets, hoses, filters, breathers, belts, nozzles, friction plates, glass, clutch and brake linings, wire rope,
nuts and fittings, exterior coatings, proper tightening of bolts, adding or replacing of fluids, adjustments of any kind, services, inspections, diagnostic time, travel time and supplies such as hand
cleaners, towels and lubricants.
6. Damage caused by carrier handling. Any such claim for damage should be filed immediately with the respective carrier.
7. Repairs, work required or parts exposed as the result of age, storage, weathering, lack of use, demonstration use, or use for transportation of corrosive chemicals.
8. Damage resulting to the equipment or parts should the owner or operator continue to operate the equipment after it has been noted that a failure has occurred.
9. Damage caused by, or labor or other costs related to, work performed by personnel not authorized by Seller to service the equipment.
IN NO EVENT SHALL SELLER, OR ANY AFFILIATE, SUBSIDIARY OR DIVISION THEREOF BE LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES
RESULTING FROM ANY BREACH OF WARRANTY, REPRESENTATION OR CONDITION, EXPRESS OR IMPLIED, OR ANY TERMS OF THIS WARRANTY, OR ANY BREACH OF ANY DUTY
OR OBLIGATION IMPOSED BY STATUTE, CONTRACT, TORT, COMMON LAW OR OTHERWISE (WHETHER OR NOT CAUSED BY THE NEGLIGENCE OF THE SELLER, ITS EMPLOYEES,
AGENTS OR OTHERWISE), INCLUDING, WITHOUT LIMITATION, LOSS OF USE, LOST PROFITS OR REVENUES, LABOR OR EMPLOYMENT COSTS, LOSS OF USE OF OTHER
EQUIPMENT, DOWNTIME OR HIRE CHARGES, THIRD PARTY REPAIRS, IMPROPER PERFORMANCE OR WORK, LOSS OF SERVICE OF PERSONNEL, LOSS OF CONTRACTOR
OPPORTUNITY AND PENALTIES OF ANY KIND, PERSONAL INJURY, EMOTIONAL OR MENTAL DISTRESS, OR FAILURE OF EQUIPMENT TO COMPLY WITH ANY APPLICABLE LAWS.
The Seller’s liability to the Buyer shall not in any event exceed the purchase price of the equipment.
THIS WARRANTY IS EXPRESSLY IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, REPRESENTATIONS AND CONDITIONS, EXPRESS OR IMPLIED AND ALL OTHER
STATUTORY, CONTRACTUAL, TORTIOUS AND COMMON LAW OBLIGATIONS OR LIABILITY ON SELLER'S PART ARE HEREBY EXPRESSLY EXCLUDED TO THE MAXIMUM EXTENT
PERMITTED BY LAW. THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE LIMITED WARRANTY CONTAINED HEREIN. Seller neither assumes nor authorizes any other person to
assume for Seller any other liability in connection with the sale of Seller’s equipment. In the event that any provision of this warranty is held unenforceable for any reason, the remaining provisions shall
remain in full force and effect. TUFM1050 Rev D 03-06-12
Terex Utilities, Inc.
3140 15th Ave SE, Watertown, SD 57201
Phone: 605-882-4000 Fax: 605-882-1842
QuotationPage 1
07/15/2022 Quote Number: QU22344-07
CITY OF AZUSA LIGHT & WATER
729 NORTH AZUSA AVENUE
AZUSA, CA 91702
Attention: HIEN VUONG
Phone: (626)812-5172Qty. Description
UNIT
1 One (1) new Terex Commander 6060 model hydraulic rotating digger derrick with a turntable winch.
Design Criteria:
* Design criteria is in accordance with current industry and engineering standards applicable and
accepted for structural and hydraulic design.
* Meets ANSI/ASSE A10.31-2019.
Elevation:
* From +80 degrees above horizontal to -20 degrees below horizontal.
Dual Lift Cylinders:
* Double-acting cylinders with chrome plated rods and integral holding valves. Trapezoid mounting
design offers greater boom support and stability providing less wear and longer life. Either
cylinder can hold the rated lifting capacity of the derrick.
Steel Lower Boom:
* The boom is a fabricated box utilizing high-strength steel plates.
Steel Intermediate Boom:
* Fabricated box constructed of high strength steel. Powered by a double acting hydraulic cylinder
equipped with integral holding valves on both extend and retract ports.
Fiberglass Hydraulic Upper Boom:
* Capable of lifting the hydraulic capacity of the derrick in all positions.
* Tested and rated for line voltage up to and including 46 KV AC.
* Tapered non-metallic rollers mounted at the end of the intermediate boom support the fiberglass
boom under load minimizing scratches and abrasions. The sides of the fiberglass boom are supported
and guided by non-metallic rollers to reduce tracking.
Continuous And Unrestricted Rotation:
* A hydraulic rotary manifold provides a rotating oil distribution system for continuous and
unrestricted rotation.
Miscellaneous:
* Relief valves to protect the derrick circuits and digger-winch circuits.
* Hydraulic hoses are equipped with permanent type hose fittings.
* A custom load chart stating actual lifting capacity considering all final options, chassis, body,
Quotation
QU22344-07
Page 2
Qty. Description
outriggers, and other fixed equipment with capacity based on completed unit stability is included.
* A boom-angle indicator and decal are mounted on each side of the lower boom.
* All metallic components of the complete digger derrick device are prime painted.
* Two complete manuals providing operational and maintenance procedures, and a replacement parts
listing.
* Warning decals provided with unit.
Turntable Winch Including Transferable Pole Buddy Assembly:
* 15,000 lb. bare drum capacity planetary winch equipped with hydraulic counterbalance valve
mounted on the derrick turntable. Equipped with flanged pole buddy transferable from intermediate
boom to upper boom.
Bare Boom Lift Capacities:
* Boom Angle: All Booms Retracted
* Maximum Elevation 38050 lbs.
* 10 Ft. Radius 18100 lbs.
Work Zone Capacities:
Median Digging Radius 26.9 ft.
Digging Capacity at Median Radius 3194 lbs.
Lift Capacity at Median Radius 5025 lbs.
Sheave Height:
* With intermediate boom extended, 47.2 ft. at maximum elevation.
* With upper boom extended, 60.0 ft. at maximum elevation.
* Dimensions are based on a 40" chassis frame height.
Load Radius:
* 37.3 ft. from C/L of rotation, at 0 degree, intermediate boom extended.
* 50.3 ft. from C/L of rotation, at 0 degree, upper boom extended.
1 RH Command Post Radio Controls:
* Provides individual levers in a console on the command post.
* Permanent type control decals are provided.
* Adjustable cushioned operator seat is provided as standard and includes side rails.
* Hydraulic foot throttle.
* Command post access step and hand rail installed.
* Includes (1) waist harness, (2) rechargeable batteries, (1) battery charger, (1) receiver, (1)
transmitter, and placards.
* Includes a control and horn.
* Stop/start at control station.
Note:This will require Combined System Hydraulics - Not available Single Speed Hydraulics.
1 Operator light at controls at command post/console.
1 Pole Guide and Interlock For Transferable Pole Buddy:
* Hydraulic cylinders equipped with holding valves operate the tilt and open/close on pole guide
arms.
* Pole guide hoses are contained in a chain type carrier, installed on the side of the boom.
* Transfers from the end of the intermediate boom to the end of the upper boom and vice versa.
* The pole guide is installed on the transferable pole buddy flange assembly.
Quotation
QU22344-07
Page 3
Qty. Description
* Protects both the pole guide and the boom from accidental damage caused by extending the upper
boom while the pole guide is on the intermediate boom and tilted downward. Includes actuating
plunger and two poppet valves.
** ALTERED FROM STANDARD **
1 Removable Pole Guide & Combination Jib/Crossarm Attachment (TPN: Y555):
(1) Removable Pole Guide - Lrg. Claw Arms handle up to 29-Inch Dia. Poles.
(1) Multi-Phase Lifting Jib:
* 4x6-Inch x 10-Feet Long Fiberglass Combination Jib - (7) Extension
-- Positions.
* Mounting Bracket Rotates & (4) Manual Articulating Pinning Positions.
* Includes End Mount Sheave & (4) Hastings Wire Holders
(1) Single Phase Vertical Lifter - 5.25-Inch Diameter with Wire Holder.
* Comb. Jib & Lifter are interchangeable with Removable Pole Guide.
* See Terex PD1053 for additional information.
1 Load Moment Limiter (Hydraulic Overload Protection) for Boom system:
* An Operator aid to prevent damage to the derrick by stopping selected functions if an over load
occurs. The functions necessary to eliminate the overload condition remain operational, to relieve
the cause of overload.
* Disables boom down, boom extend, winch up, and digger dig when boom lift senses an overloaded
condition.
* The system is fully automatic relative to the operation and re-set functions.
Pressure Gauge with Color Zone Ring for Load Moment Limiter:
* A indicator gauge which provides an indicator when approaching maximum capacity.
1 Planetary Slip Rotation:
oPlanetary gear drive rotation with spring applied hydraulically released parking brake and
reversible hydraulic motor with integral hydraulic braking capability. The slip drive releases the
brake
when rotating, winching, and digging.
oOffers side load protection when winching and digging only.
1 Customer Declined, Anti-Two Block.
* Purchaser is aware of OSHA Crane and Derrick standard, subpart CC for construction (1926.1416).
** ALTERED FROM STANDARD **
1 Customer Declined Digger Motor / Digger Motor Plumbing / Auger Storage
-- Bracket / Auger Shaft / Auger or other associated items.
1 Pedestal:
* Square constructed pedestal has access holes for maintenance of hydraulic plumbing.
1 Terex South Dakota, Inc. Pole Puller: (P/N 0467557)
* Rated Capacity is 60,000 lbs.
* Base plate dimension is 8 in. x 12 in.
* 7 feet of steel chain.
Quotation
QU22344-07
Page 4
Qty. Description
1 Return Line Filter Condition Warning Light.
* Includes light and a sensor to be installed after unit is mounted.
* Note: Does not include reservoir.
1 Boom Stow Protection For Controls Above Rotation:
* Protects against damage from excessive down pressure by cutting off oil supply to the derrick.
* Includes a 2 channel electric collector ring.
1 Pump For Use (Required Approximate 120% PTO):
Tandem vane high efficiency 3000 psi rated hydraulic pump providing 40 gallons per minute combined
flow.
* Provides 16 gallons per minute to boom functions and 24 gallons per minute to digger/winch
functions and combines flow when boom is not in operation providing 40 gallons per minute to
digger/winch at 1600 rpm engine speed, boom extension is faster than winch.
* Provides up to 6 gallons per minute for tools at 700 rpm engine speed.
*Includes pump kit.
FOR GENERAL ONLY: With the use of Radio Controls.
1 Hydraulic Reservoir:
50 gallon hydraulic oil reservoir includes 10 micron replaceable cartridge type return line filter
mounted in reservoir with bypass valve incorporated in filter to prevent restricted flow.
* A 100 mesh in screen in filter cap. A 40 mesh screen included in tank outlet and a 2 1/2" full
flow ball type shut off valve.
* Relief valves to protect the derrick circuits and digger-winch circuits.
1 Super Duty A-Frame Outriggers with swivel type stabilizer pads. (8982)
1 Super Duty A-Frame Outriggers with swivel type stabilizer pads. (8982)
1 Controls For 2-Sets Of Outriggers And Auxiliary Tool Outlets Below Rotation (Diggers):
* Recessed at rear of truck each side for ease of view for outrigger placement.
* Includes switches and alarm for outrigger in motion alarm.
1 High Pressure code to obtain 3000 psi at outriggers.
Note - this is on A-frames and Radial outriggers for Digger Derricks.
1 Adjustable flow divider for auxiliary tool outlets below rotation.
1 Outrigger Interlock:
* To operate the boom the outriggers must be extended.
** ALTERED FROM STANDARD **
1 Custom Subframe constructed with an open center:
* 8-Inch Tall X 232.0-Inch Long.
* Terex PN: 493643.
** ALTERED FROM STANDARD **
1 Custom Tie Down Kit for 8-Inch Tall Subframe:
* Terex PN: TBD - Similar to 608851.
Quotation
QU22344-07
Page 5
Qty. Description
1 Remote Sensor Bracket:
* Bracket to be used with the Williams remote sensor. Installed to supply sensor to work with truck
engine.
1 Terex Advanced Chassis Controller:
* Multiplexed system to include: Controller, LCD Screen, Manual and Schematics.
* Standard Options: Diagnostics, Status Screens, Event Log, Hours Meter, Selectable Button Labels,
System Alerts and System Test.
* Programmable settings allow installer to customize/select options need for their application.
* Screw terminal-type connections and enclosure to cover connections.
* Recommended on Class 6 and above chassis with multiple outputs
* The PTO hour is standard. The engine hour meter is standard (When available). This is a message
we get from the truck Data link. All trucks except Ford give us the Engine hours. So if it's a
Ford, we just display PTO hours.
1 American flag displayed on unit.
1 Factory Warranty
1 Clevis for two part line attachment.
1 Two Part Sheave Assembly with 12 ton capacity:
* Two-part line attachment includes one snatch block.
** ALTERED FROM STANDARD **
1 .
BODY, INSTALLATION
** BODY INFORMATION **
1 Steel Transverse Tandem Bobtail Body and Accessories:
* As per the attached Body Specifications.
1 Install Derrick Over Rear Axle And Install All Associated Components:
* Final test and inspect completed unit including stability and dielectric testing
per manufacturers requirements.
1 Hose and fittings to connect the hydraulic system from the oil reservoir to the
pump and unit.
1 Installation on Compressed Natural Gas Fuelled Chassis:
1 Power take off with indicator light for automatic transmission.
1 DOT Inspection.
1 Set chassis parameters.
Quotation
QU22344-07
Page 6
Qty. Description
1 Back-up alarm to sound when the vehicle is shifted into reverse.
4 24" x 24" x 2" poly outrigger pads.
* Includes outrigger pad storage.
2 Installation of Body Vendor Supplied Outrigger Pad Holder(s) and
Retainer(s):
* Terex PN: None.
2 Rubber wheel chocks with handle.
1 Mounting bracket for water cask for exterior mounting.
* Location to be determined on Approval Drawings.
1 Grab handles as necessary for 3-point contact.
1 Installation of Body Vendor Supplied Access Steps:
* (2) Rear Cable Steps.
* (2) Bed Area Steps.
* (1) Side Access Cable Step.
1 Access step mounted on floor of the body to access the top of body compartment or access platform.
1 Fold-up access step mounted on command post.
2 Mud flap with logo 30" tall.
Note: Trim As-Required.
1 A mounting kit for over 45" flatbed frame height for a pair of mud flaps.
1 Jib storage bracket.
1 Tilt Table Accessory Storage Brackets:
* Storage Brackets for Pole Claw Bracket or Tilt Table Accessories.
* Terex PN: TBD.
2 Pull-Out D-Ring Kit(s):
* Locate (1) on Rear Face of Streetside Rear Outrigger - Facing Streetside.
* Locate (1) on Rear Face of Curbside Rear Outrigger - Facing Curbside.
* Reinforce as necessary for use with Capstan Head.
* Similar to Terex PN: 65370545.
1 Boom rest.
1 Digger Derrick single position boom rest saddle.
Quotation
QU22344-07
Page 7
Qty. Description
1 Peterson LED 7-lamp DOT Lighting Package:
* Complies with FMVSS 108.
* Includes required lights, junction box and wiring harness.
1 Lighted license plate bracket kit with LED light.
1 Peterson Clearance Light Kit with 2.50" Amber, LED.
2 Amber strobe light (LED) with 4" tall & 6" dia. lens, and branch guard.
* Locate (1) on Streetside of Boom Rest.
* Locate (1) on Streetside Rear of Body.
1 Strobe mounting bracket.
1 Strobe post mount bracket weldment for medium chassis.
Note: Includes (2) 104381 corner gussets on bracket.
1 Body Compartment Lighting Switch & Wiring:
* Body Compartment Lighting to be wired to Terex Advanced Chassis Controller
-- Switch - Energised when Chassis Lights are ON.
2 Remote engine stop/start OR two speed control from rear of vehicle.
* Locate Stop/Start & Two Speed at Streetside Capstan Controls.
2 Remote engine stop/start And two speed control from rear of vehicle.
* Locate (1) Curbside Capstan Controls.
* Locate (1) at Outrigger Controls at Rear.
1 Premier 480 pintle hook:
* Safety chain eyes.
* Chassis frame reinforcements.
"Pintle hook brackets and attachment methods are designed to meet the associated pintle hook
ratings. They are not designed for recovery purposes. If recovery attachments are required, please
order the appropriate tow eyes."
* Locate Throat approx. 28-Inches from Ground.
1 ICC rear bumper.
1 7-prong trailer socket.
NOTE: Stop & turn signal lights on combined circuit.
Quotation
QU22344-07
Page 8
Qty. Description
1 Heat shields, as required to protect hydraulic system from exhaust.
1 Oil tank mounting for external reservoirs.
* Locate at Streetside Front of Cargo Area - Under Rubber Goods Storage.
80 Fill with Hydraulic oil for general purpose use.
* Refer to the product maintenance manual for specific type to be used.
1 200-Feet of 1-Inch Diameter Amsteel II Plus Uncoated Winch Rope:
* Eye on each end of Rope.
* Standard Color.
* Minimum (4) wraps on Winch Drum per Amsteel Guidelines.
* Similar to Terex PN: 65366203.
1 Crosby, Hook and Jam, Swivel, 10 ton w/Latch Assy.
1 Hannay spring loaded hydraulic hose reel with 4-way roller assembly.
* 50' of 1/2" Hose Set.
* Quick disconnect HTMA male and female flush faced couplers and dust covers.
* Installed on hose reel with ball stop.
* Locate on Tailshelf - Payout to Rear.
* Set to 6-GPM and 2000-PSI.
1 Pole puller storage bracket with tie down strap.
* Locate on Curbside Front Outrigger.
1 Safety Kit consists of the following:
* 5-lb ABC fire extinguisher with bracket.
* James King triangle reflector kit.
* Fire Extinguisher to be Shipped Loose.
* Locate Triangle Kit behind Passenger Seat.
2 Level indicator, Rieker inclinometer, +/- 5 Degrees.
1 Rear view vision square light camera & 7" monitor system.
1 Braden Hydraulic Two-Speed Front Mounted Bumper Winch Assembly with Dual
-- Extension Shafts:
* Model #05517-AHGU5-12FEEBR-LA-25.
* Winch Single Line Pull 20000-Lbs. Rated Capacity.
* Curbside & Streetside Extended Shafts.
* Four way roller assembly.
Quotation
QU22344-07
Page 9
Qty. Description
* (2) Tow Eyes.
* Miscellaneous hose and fittings.
* Terex PN: 65329789.
1 Wire rope, 5/8" x 200', 6x19, one eye with thimble.
1 Braden 7" ductile iron capstan head.
1 Capstan Head Storage:
* Terex PN: TBD.
1 Electric/Hydraulic Foot Pedal Winch/Capstan Control:
* (1) Winch/Capstan Rotation Switch - Terex PN: 0100541.
* (1) Foot Pedal - Terex PN: 65374998.
* (1) 25-Ft Lead - Terex PN: TBD.
* (1) Socket - Locate at Winch Controls - Terex PN: P916009.
* (1) Trailer Plug - on Lead - Terex PN: 0094112.
* (1) Winch Placard - Similar to Terex PN: P101992.
* (1) Winch Payout Placard - Similar to Terex PN: 0100170.
1 Shackle 1" with 10 ton capacity.
2 Kill Switch(es) at Front Bumper:
* Locate (1) on each side of Front Bumper Winch.
* Terex PN: 65344438.
1 Paint C6000, C7000 derrick one color.
1 Paint front winch one color.
1 Paint body floor with non-skid paint.
1 Paint compartment top with non-skid paint.
1 Paint second color.
Paint the Following Areas - YELLOW:
* Boom - 1st Section Only.
* Turntable and Command Post.
* Pedestal.
* Rear Outriggers.
* Boom Rest.
* Front Outriggers.
.
***REMAINDER OF UNIT / BODY & ACCESSORIES TO BE TAFFETA WHITE.
Quotation
QU22344-07
Page 10
Qty. Description
1 Paint premium for yellow, orange or red color.
***CUSTOMER TO VERIFY YELLOW PAINT CODE AT TIME OF ORDER.***
CHASSIS
** CHASSIS INFORMATION **
1 Freightliner M2-112 6x4 Regular Cab Chassis:
* Compressed Natural Gas.
* As per the attached Chassis Specifications.
SPECIAL CHARGES
1 Freight
** ADDITIONAL INFORMATION **
Wheels Up Delivery:
City of Azusa Light & Water
729 North Azusa Avenue
Azusa CA 91702
.
Contact: Hien Vuong
Phone: (626) 812-5172
** ALTERED FROM STANDARD **
1 Terex Utilities to Register/ License & Title Completed Unit prior to
-- Delivery:
* DMV Fees are calculated upon the Quoted Sale Price and may vary at
-- time of invoice.
* Vendor: Road Ready Registration Entities (909)390-3575 Office.
1 First Article Inspection, Digital
** ADDITIONAL INFORMATION **
* SpinCar.
10 CALIFORNIA TIRE FEE
** ALTERED FROM STANDARD **
1 .
Quotation
QU22344-07
Page 11
Qty. Description
OPTIONS: ADD
QU22344-07
Page 12
Notes:
1. Federal Excise Tax will be added if certificate is not supplied with order.
2. The following items must be considered by the purchaser if not already included:
Back-up Alarm; Strobe Light; Wheel Chocks; Outrigger Pads; Truck Grounding Cable;
Barricade Kit; Boom Stow Interlock; Auxiliary Let Down; and Platform Liner.
3. Terex Utilities, Inc. strongly recommends all installation accessories be located up front in
front in the quote or secondarily on the approved engineering drawing. Any accessories located
or relocated during manufacturing may be subject to additional charges.
4. Terex Utilities, Inc. - Offers In-service Training.
5. Terex Utilities, Inc. - Assembly in Watertown, South Dakota is ISO 9001:2000 Certified.
*
*
*
*
*
*
*
*
*
*To:Terex Utilities
*Attn:Steve Fedt Date:6/27/2022
*Customer:City of Azusa Light & Water
*
*Spec Number:QU22344 Customer Service Rep:Dave Converse
*State:California
*Engine Type:Diesel Outside Sales:House
*Crane/Unit Model:C6060
*Chassis:Freightliner Reference:
*Axle Configuration:TANDEM AXLE (6x4)Same As:
*
*Dakota Bodies LLC.Steel Bobtail Body
*Terex
198 Inches Long x 46 Inches High x ,93 Inches Wide
Chassis Cab to Axle (CA) of 162 Inches
Body Dimensions:
198 Inches - Body Length
46 Inches - Body Height
93 Inches - Body Width
162 Inches - Chassis C/A
46 Inches - Compartment Height
18 Inches - Compartment Depth
57 Inches - Load Space Width
25 Inches - Top of Body to Top of Floor Dimension
24 Inches - Horizontal Compartment Height
N/A Inches - Wheel Box Height
Body Materials:
16 ga Galvanneal - Main Body Material
12 ga 4-Way Treadplate - Compartment Tops Material
16 ga Galvanneal - Wheel Panels Material
16 ga Galvanneal - Front Bulkhead Material
18 ga Galvanized - Shelving Material
Adjustable on Dual Unistrut - Shelving Mounting Style
No - Front Rock Guards Material
No - Wheel Well Liners Material
No - Bed Area Wall Liners Material
Other Body Details:
Quotation Number Q45205
OPTIONS
Door Materials:
Standard, Double Panel - Door Type
18 ga Galvanneal - Inner Door Material
18 ga Galvanneal - Outer Door Material
Stainless Steel Rod & Socket - Door Hinge Style
5/16" Stainless Steel - Door Rod Material
Gas Cylinder - Vertical Door Holder Option
Gas Cylinder - Horizontal Door Holder Option
Single Point Rotary (Stainless Steel) - Latch Type
Keyed Alike - Lock Type
- Wrap Around Striker with Rounded Corners
Floor and Understructure:
12 ga (.109) 4-Way Treadplate - Bed Area Floor Material
C6060 - Unit Cutout in Floor
Stringer - Body Frame Style
Structural - Body Frame Material
3 Inch - Body Frame Height
Other Floor Details:
- Hydraulic Tank cutout and reinforcing plates below floor - Filter Access panel cutout location TBD
Cargo Wall Tie Downs:
- 140" Long Uni-strut rail installed on Streetside Cargo wall as high as possible
- Ten (10) Uni-strut hooks for Streetside Uni-strut rail
CM 6060 Subframe
Dakota Bodies Welded Subframe Assembly (Body Bolted to Subframe)
- For use with CM 6060 installed on Tandem Axle Chassis
- Terex Supplied Parts:
Qty. 1 8" x 235.50" Subframe Weldment Weld On / Installed
Qty . 1 Socket / Wrapper Weld On / Installed
Qty. 2 Filler Plates for Super Duty Outriggers Weld On / Installed
Qty. 1 Super Duty A-Frame Front Jack (#8982) Weld On / Installed
Qty. 1 Super Duty A-Frame Rear Jack (#8982) Weld On / Installed
Qty. 1 Tie Down Kit (#608853), with the Following Additional Items:
Qty. 6 Tie Down Angles (#367852), Weld On / Installed
Remaining Tie Down Kit Items are retained and Terex and Installed There
- Install boom rest
- Install pole rack on front outrigger
Possum Belly Storage:
- Possum belly storage with drop down door and slam latch at rear
- Stops in all tubes at 120"
- Hose tunnel cutout
Accessories:
- Rubber Rolled Crown (PN# 30136) (Installed with Cutouts)
- Automotive Bulb Weatherstripping (PN# 30132) (Installed)
- Master Door Lock, Hook and Loop System on Both Sides with Three (3) Spring Loaded Door Handles
- Install Mudflap Brackets
Interior Lighting:
- L.E.D. Rope Lights (PN# 30811) in All body Compartments (Installed)
- Excludes top boxes and tailshelf Compartments
Paint:
- Powdercoat Complete; Interior and Exterior, Taffeta White DWS9-20001; PC0020
- Complete Bed Area Painted Same as Body
- Subframe and Outriggers painted Black
Streetside Compartmentation:
1st Vertical Compartment:
28'' Wide x 46'' High x 18'' Deep Compartment
- Two (2) 1/2'' Dia. Locking / Swivel Carriage Bolt Hooks, Installed as high as possible, 1-0-1 Hook Set
- Transverse Compartment with One (1) Fixed Shelf Above Drawer unit that extends to door frame - 1" lip
- T-Handle Dual Latching Drawers Mounted on 250 lb. Roller Bearing Slides
- Drawers will Latch Closed on RH and LH Side of Drawer
- Drawers will have Divider Slots on 2" Centers
- One (1) Drawer 3'' High x 18'' Wide x 45'' Deep
- Seven (7) Adjustable Cross-width Dividers installed in Drawer
- Transverse Floor to have a 1" lip
2nd Vertical Compartment:
28'' Wide x 46'' High x 18'' Deep Compartment
- Six (6) 1/2'' Dia. Locking / Swivel Carriage Bolt Hooks, Installed as high as possible, 1-4-1 Hook Set
3rd Vertical Compartment:
28'' Wide x 46'' High x 18'' Deep Compartment
- Six (6) 1/2'' Dia. Locking / Swivel Carriage Bolt Hooks, Installed as high as possible, 1-4-1 Hook Set
1st Horizontal Compartment:
58'' Wide x 24'' High x 18'' Deep Compartment
- Lift up compartment doors with gas cylinders..
- One (1) Plain Fixed Shelf midway below hotstick shelf
2nd Horizontal Compartment:
58'' Wide x 24'' High x 18'' Deep Compartment
- Lift up compartment doors with gas cylinders..
- One (1) Plain Fixed Shelf midway below hotstick shelf
Streetside Hotstick Shelf:
142 Inch Long Shelf Installed on the Streetside with a Rear Dropdown Access Door
- Stainless Steel Automotive Rotary Type Door Latch
- Stud Mounted Latches to Have Hidden Fasteners Inside the Door
- Striker Installed in Door Frame for Maximum Opening
- Stud Mounted Automotive Style Latches Have Interior Plastic Latch Covers
- Automotive Bulb Type Weatherstripping Mechanically Fastened to Door Frame with Rounded Corners
- Two hotstick brackets
Curbside Compartmentation:
1st Vertical Compartment:
28'' Wide x 46'' High x 18'' Deep Compartment
- Two (2) 1/2'' Dia. Locking / Swivel Carriage Bolt Hooks, Installed as high as possible, 1-0-1 Hook Set
- Transverse Compartment with One (1) Fixed Shelf Above Drawer unit that extends to door frame - 1" lip
- T-Handle Dual Latching Drawers Mounted on 250 lb. Roller Bearing Slides
- Drawers will Latch Closed on RH and LH Side of Drawer
- Drawers will have Divider Slots on 2" Centers
- One (1) Drawer 3'' High x 18'' Wide x 45'' Deep
- Seven (7) Adjustable Cross-width Dividers installed in Drawer
- Transverse Floor to have a 1" lip
Curb Side Access Step 28" Wide
Hinged Grip strut access steps to bed area with Vented Battery Storage Underneath
One (1) Small Stainless Steel slam style paddle latch.
Two (2) Gas assist door openers.
- Back to be removable and bolt on with Two (2) vents - One at top and one at bottom centered
12 gauge galvanneal risers and side kickplates.
Two (2) Chrome Bolt-on grabhandles at side access
One (1) DB PN# 31593 cable type access step under the side access steps. (Ship loose)
- To have a 1/4" x 4" flat added to bottom of step for mounting cable step
3rd Vertical Compartment:
24'' Wide x 46'' High x 18'' Deep Compartment
- Three (3) 1/2'' Dia. Locking / Swivel Carriage Bolt Hooks, Installed as high as possible, 1-1-1 Hook Set
1st Horizontal Compartment:
58'' Wide x 24'' High x 18'' Deep Compartment
- Lift up compartment doors with gas cylinders..
- Two (2) Fixed Shelves Evenly Spaced
- Divider Slots on 2'' Centers, with Six (6) Adjustable Dividers
2nd Horizontal Compartment:
58'' Wide x 24'' High x 18'' Deep Compartment
- Lift up compartment doors with gas cylinders..
- Two (2) Fixed Shelves Evenly Spaced
- Divider Slots on 2'' Centers, with Six (6) Adjustable Dividers
Tailshelf:
- 12 Ga. treadplate tailshelf 32-1/2 inches long
- Tailshelf has cutouts foroutriggers on each side
- Valve mounting plates at rear
Tailshelf Rear Lighting:
- 7-Lamp light bar installed at rear of tailshelf -
Wheel Chock Storage:
- One (1) built into body fender panel on Streetside and One (1) on Curbside
- Include pendulum retainers
Grab Handles: Bolt-on/Installed
- Four (4) Bolt-on pool type grabhandle for installing on top of tailshelf - Two each side
Access Steps: Bolt-on/Installed
- Two (2) DB PN# 31594 Cable type access step under the tailshelf - One each side
Outrigger Pad Holders: Bolt-on/Installed
- Two (2) Double Stacked under body mounted outrigger pad holders. (Ship Loose.)
- Include pendulum retainers
- Designed to hold Two (2) 2" DICA pads
- Painted same as body
Bed Area Steps: Bolt-on/Installed
- Two (2) Compartment Top Bed area steps bolted on to 1/2" tapped flats
- Painted same as body
Rubber Goods Box: Bolt-on/Installed
56" long X 16-1/2" high X 30" wide 16 gauge Galvanneal box with
12 gauge hot rolled treadplate top with
One (1) lift up lid.
- Gas assist door openers.
- Lift-up handle installed on front edge of box lid.
- Over center pad lockable latch. Part Number 30763
- Automotive bulb weatherstrip installed around top opening.
- Drain Holes with splash guards in corners of box
- Four (4) 3x3” Angle Legs approx. 42” Tall – Flanges to bolt to Body Floor.
NOTE: Hydraulic Tank will be located underneath against Cargo Wall
Bolt-Bin: Bolt-on/Installed
- Approx. 48” Long x 8” Wide
- (24) 4” Sq. x 0.125” Wall Tubes Total.
Rear Row: 14” Tall Tubes to Front & 12” Tall Tubes to Rear.
Front Row: (2) 12” Tall, (2) 11” Tall, (2) 10” Tall, (2) 9” Tall * (4) 8” Tall Tubes with
- Taller Tubes to the Front.
- Locate under the Rubber Goods Box to outside of Hydraulic Tank.
- Bolts in Place and allows room for drainage.
- Painted same as body
Hot Arm Box: Bolt-on/Installed
140" long X 13" high X 22-1/2" wide 16 gauge Galvanneal box with
12 gauge hot rolled treadplate top with
Two (2) lift up lids
- Gas assist door openers.
- Lift-up handle installed on front edge of box lid.
- Over center pad lockable latch. Part Number 30763
- Automotive bulb weatherstrip installed around top opening.
- Interior to accommodate rubber padded metal brackets - Terex to provide more information
- Painted Same as body
Ladder Box: Bolt-on/Installed on risers to clear outrigger
150" long X 20" high X 12" wide 14 gauge Galvanneal Ladder box with Rear rollers and chian retainer
- Include a removable clean-out panel
- Single panel Vertically hinged Rear Access Door
- Stainless Steel Slam Latch
- Painted same as body
Material Rail: Bolt-on/Installed on Ladder box
72 inches long 1" schedule 40 pipe with 12 gauge galvanneal 6" stand off brackets on each end and
six (6) sliding material hooks made of 1/2" round stock installed on
- Painted same as body
Cone Holder: Bolt-on/Installed on Center of tailshelf at rear
- Hinged cone holder 12" high with a 12" x 12" mounting plate
- Include thumb latch to stay in place
- Painted same as body
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 1 of 16
D I M E N S I O N S
VEHICLE SPECIFICATIONS SUMMARY - DIMENSIONS
Model ....................................................................................................................................................................................... M2112
Wheelbase (545) .......................................................................................................................... 6625MM (261 INCH) WHEELBASE
Rear Frame Overhang (552) .................................................................................. 2550MM (100 INCH) REAR FRAME OVERHANG
Fifth Wheel (578) ................................................................................................................................................... NO FIFTH WHEEL
Mounting Location (577) ............................................................................................................... NO FIFTH WHEEL LOCATION
Maximum Forward Position (in) .................................................................................................................................................... 0
Maximum Rearward Position (in) ................................................................................................................................................. 0
Amount of Slide Travel (in) ........................................................................................................................................................... 0
Slide Increment (in) ...................................................................................................................................................................... 0
Desired Slide Position (in) ......................................................................................................................................................... 0.0
Cab Size (829)................................................................................ 112 INCH BBC FLAT ROOF ALUMINUM CONVENTIONAL CAB
Sleeper (682) ................................................................................................................................ NO SLEEPER BOX/SLEEPERCAB
Exhaust System (016) ......................SINGLE HORIZONTAL MUFFLER WITH HORIZONTAL TAILPIPE EXHAUST, RH MOUNTED
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 2 of 16
TABLE SUMMARY - DIMENSIONS
Performance calculations are estimates only. If performance calculations are critical, please contact Customer Application
Engineering.
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 3 of 16
S P E C I F I C A T I O N P R O P O S A L
Data Code
Description
Weight
Front
Weight
Rear
Price Level
PRL-23M M2 PRL-23M (EFF:01/21/20)
Data Version
DRL-001 SPECPRO21 DATA RELEASE VER 001
Vehicle Configuration
001-175 M2 112 CONVENTIONAL CHASSIS 8,244 6,026
004-223 2024 MODEL YEAR SPECIFIED
002-004 SET BACK AXLE - TRUCK
019-002 STRAIGHT TRUCK PROVISION
003-001 LH PRIMARY STEERING LOCATION
General Service
AA1-002 TRUCK CONFIGURATION
AA6-001 DOMICILED, USA 50 STATES (INCLUDING
CALIFORNIA AND CARB OPT-IN STATES)
A85-010 UTILITY/REPAIR/MAINTENANCE SERVICE
A84-1UT UTILITY BUSINESS SEGMENT
AA4-011 FIXED LOAD COMMODITY
AA5-006 TERRAIN/DUTY: 10% (SOME) OF THE TIME, IN
TRANSIT, IS SPENT ON NON-PAVED ROADS
AB1-008 MAXIMUM 8% EXPECTED GRADE
AB5-003 MAINTAINED GRAVEL OR CRUSHED ROCK -
MOST SEVERE IN-TRANSIT (BETWEEN SITES)
ROAD SURFACE
995-1AE FREIGHTLINER LEVEL II WARRANTY
A66-99D EXPECTED FRONT AXLE(S) LOAD : 16000.0 lbs
A68-99D EXPECTED REAR DRIVE AXLE(S) LOAD :
40000.0 lbs
A63-99D EXPECTED GROSS VEHICLE WEIGHT CAPACITY
: 56000.0 lbs
Truck Service
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 4 of 16
Data Code
Description
Weight
Front
Weight
Rear
AA3-006 UTILITY BODY
A89-99D BRAKING-EXPECTED CAB TO BODY
CLEARANCE : 33.0 in
AF3-2A5 TEREX
AF7-99D EXPECTED BODY/PAYLOAD CG HEIGHT ABOVE
FRAME "XX" INCHES : 32.0 in
Engine
101-27D CUM L9N 280 HP @ 2000 RPM, 2200 GOV, N-
GAS, 900 LB-FT @ 1300 RPM
-850 -70
Electronic Parameters
79A-065 65 MPH ROAD SPEED LIMIT
79B-000 CRUISE CONTROL SPEED LIMIT SAME AS ROAD
SPEED LIMIT
79K-005 PTO MODE ENGINE RPM LIMIT - 900 RPM
79L-002 PTO MODE THROTTLE OVERRIDE - LIMIT TO
900 RPM
79M-001 PTO MODE BRAKE OVERRIDE - SERVICE
BRAKE APPLIED
79P-004 PTO RPM WITH CRUISE SET SWITCH - 900 RPM
79Q-004 PTO RPM WITH CRUISE RESUME SWITCH - 900
RPM
79S-001 PTO MODE CANCEL VEHICLE SPEED - 5 MPH
79U-007 PTO GOVERNOR RAMP RATE - 250 RPM PER
SECOND
80G-002 PTO MINIMUM RPM - 700
Engine Equipment
99C-121 2010 EPA/CARB ULNOX/GHG21
CONFIGURATION
99D-012 2008 CARB EMISSION CERTIFICATION -
EXEMPTED VEHICLE; NO CLEAN IDLE LABEL
REQUIRED
13E-001 STANDARD OIL PAN
105-001 ENGINE MOUNTED OIL CHECK AND FILL
014-099 SIDE OF HOOD AIR INTAKE WITH FIREWALL
MOUNTED DONALDSON AIR CLEANER
124-1DJ DR 12V 160 AMP 36-SI BRUSHLESS
QUADRAMOUNT PAD ALTERNATOR WITH
REMOTE BATTERY VOLT SENSE
10
292-235 (2) DTNA GENUINE, FLOODED STARTING, MIN
2000CCA, 370RC, THREADED STUD BATTERIES
-40 -10
290-017 BATTERY BOX FRAME MOUNTED
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 5 of 16
Data Code
Description
Weight
Front
Weight
Rear
* 281-008 STANDARD BATTERY JUMPERS WITH
ADDITIONAL GROUND STUD MOUNTED 12 INCH
AFT SPRING SHACKLE
282-001 SINGLE BATTERY BOX FRAME MOUNTED LH
SIDE UNDER CAB
291-017 WIRE GROUND RETURN FOR BATTERY CABLES
WITH ADDITIONAL FRAME GROUND RETURN
289-001 NON-POLISHED BATTERY BOX COVER
87P-001 CAB AUXILIARY POWER CABLE 5
295-029 POSITIVE AND NEGATIVE POSTS FOR
JUMPSTART LOCATED ON FRAME NEXT TO
STARTER
2
107-032 CUMMINS TURBOCHARGED 18.7 CFM AIR
COMPRESSOR WITH INTERNAL SAFETY VALVE
108-002 STANDARD MECHANICAL AIR COMPRESSOR
GOVERNOR
131-013 AIR COMPRESSOR DISCHARGE LINE
152-041 ELECTRONIC ENGINE INTEGRAL SHUTDOWN
PROTECTION SYSTEM
016-013 SINGLE HORIZONTAL MUFFLER WITH
HORIZONTAL TAILPIPE EXHAUST, RH
MOUNTED
-160 -80
28F-010 ENGINE AFTERTREATMENT WIRING, OXYGEN
SENSOR
239-001 STANDARD EXHAUST SYSTEM LENGTH
237-052 RH STANDARD HORIZONTAL TAILPIPE
23U-998 NO DIESEL EXHAUST FLUID TANK -25 -25
273-018 HORTON DRIVEMASTER ADVANTAGE ON/OFF
FAN DRIVE
276-001 AUTOMATIC FAN CONTROL WITHOUT DASH
SWITCH, NON ENGINE MOUNTED
110-017 CUMMINS SUPPLIED FLEETGUARD
COALESCING FILTER (LOW PRESSURE) CNG
118-008 COMBINATION FULL FLOW/BYPASS OIL FILTER
266-017 1300 SQUARE INCH ALUMINUM RADIATOR -20
103-039 ANTIFREEZE TO -34F, OAT (NITRITE AND
SILICATE FREE) EXTENDED LIFE COOLANT
171-007 GATES BLUE STRIPE COOLANT HOSES OR
EQUIVALENT
172-001 CONSTANT TENSION HOSE CLAMPS FOR
COOLANT HOSES
138-011 PHILLIPS-TEMRO 1000 WATT/115 VOLT BLOCK
HEATER
4
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 6 of 16
Data Code
Description
Weight
Front
Weight
Rear
140-053 BLACK PLASTIC ENGINE HEATER RECEPTACLE
MOUNTED UNDER LH DOOR
134-001 ALUMINUM FLYWHEEL HOUSING
155-058 DELCO 12V 38MT HD STARTER WITH
INTEGRATED MAGNETIC SWITCH
-10
Transmission
342-582 ALLISON 3000 RDS AUTOMATIC TRANSMISSION
WITH PTO PROVISION
Transmission Equipment
343-339 ALLISON VOCATIONAL PACKAGE 223 -
AVAILABLE ON 3000/4000 PRODUCT FAMILIES
WITH VOCATIONAL MODELS RDS, HS, MH AND
TRV
84B-012 ALLISON VOCATIONAL RATING FOR ON/OFF
HIGHWAY APPLICATIONS AVAILABLE WITH ALL
PRODUCT FAMILIES
84C-023 PRIMARY MODE GEARS, LOWEST GEAR 1,
START GEAR 1, HIGHEST GEAR 6, AVAILABLE
FOR 3000/4000 PRODUCT FAMILIES ONLY
84D-023 SECONDARY MODE GEARS, LOWEST GEAR 1,
START GEAR 1, HIGHEST GEAR 6, AVAILABLE
FOR 3000/4000 PRODUCT FAMILIES ONLY
84E-017 S5 PERFORMANCE LIMITING PRIMARY SHIFT
SCHEDULE, AVAILABLE FOR 3000/4000
PRODUCT FAMILIES ONLY
84F-018 S7 ECONOMY LIMITING SECONDARY SHIFT
SCHEDULE, AVAILABLE FOR 3000/4000
PRODUCT FAMILIES ONLY
84G-014 2200 RPM PRIMARY MODE SHIFT SPEED
84H-012 2000 RPM SECONDARY MODE SHIFT SPEED
84J-000 ENGINE BRAKE RANGE PRESELECT
RECOMMENDED BY DTNA AND ALLISON, THIS
DEFINED BY ENGINE AND VOCATIONAL USAGE
84K-000 ENGINE BRAKE RANGE ALTERNATE
PRESELECT RECOMMENDED BY DTNA AND
ALLISON, THIS DEFINED BY ENGINE AND
VOCATIONAL USAGE
84N-200 FUEL SENSE 2.0 DISABLED - PERFORMANCE -
TABLE BASED
84U-000 DRIVER SWITCH INPUT - DEFAULT - NO
SWITCHES
353-023 VEHICLE INTERFACE WIRING CONNECTOR
WITHOUT BLUNT CUTS, AT END OF FRAME
34C-001 ELECTRONIC TRANSMISSION CUSTOMER
ACCESS CONNECTOR FIREWALL MOUNTED
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 7 of 16
Data Code
Description
Weight
Front
Weight
Rear
362-1Y2 (2) CUSTOMER INSTALLED MUNCIE CS10
SERIES PTO'S
363-011 PTO MOUNTING, LH AND RH SIDES OF MAIN
TRANSMISSION
341-018 MAGNETIC PLUGS, ENGINE DRAIN,
TRANSMISSION DRAIN, AXLE(S) FILL AND
DRAIN
345-003 PUSH BUTTON ELECTRONIC SHIFT CONTROL,
DASH MOUNTED
97G-004 TRANSMISSION PROGNOSTICS - ENABLED 2013
370-015 WATER TO OIL TRANSMISSION COOLER, IN
RADIATOR END TANK
15
346-003 TRANSMISSION OIL CHECK AND FILL WITH
ELECTRONIC OIL LEVEL CHECK
35T-001 SYNTHETIC TRANSMISSION FLUID (TES-295
COMPLIANT)
Front Axle and Equipment
400-1A9 DETROIT DA-F-16.0-5 16,000# FL1 71.0 KPI/3.74
DROP SINGLE FRONT AXLE
190
402-030 MERITOR 16.5X6 Q+ CAST SPIDER CAM FRONT
BRAKES, DOUBLE ANCHOR, FABRICATED
SHOES
10
403-002 NON-ASBESTOS FRONT BRAKE LINING
419-001 CAST IRON OUTBOARD FRONT BRAKE DRUMS
409-006 FRONT OIL SEALS
408-001 VENTED FRONT HUB CAPS WITH WINDOW,
CENTER AND SIDE PLUGS - OIL
416-022 STANDARD SPINDLE NUTS FOR ALL AXLES
405-002 MERITOR AUTOMATIC FRONT SLACK
ADJUSTERS
536-012 TRW TAS-85 POWER STEERING 40
539-003 POWER STEERING PUMP
534-015 2 QUART SEE THROUGH POWER STEERING
RESERVOIR
533-001 OIL/AIR POWER STEERING COOLER 5
40T-001 MINERAL SAE 80/90 FRONT AXLE LUBE
Front Suspension
620-026 16,000# TAPERLEAF FRONT SUSPENSION 200
619-005 MAINTENANCE FREE RUBBER BUSHINGS -
FRONT SUSPENSION
* 62H-012 FRONT SUSPENSION WITH LEFT HAND AND
RIGHT HAND OFFSET SHACKLE BRACKETS
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 8 of 16
Data Code
Description
Weight
Front
Weight
Rear
410-001 FRONT SHOCK ABSORBERS
Rear Axle and Equipment
420-1K3 MT-40-14X 40,000# R-SERIES TANDEM REAR
AXLE
-40
421-586 5.86 REAR AXLE RATIO
424-003 IRON REAR AXLE CARRIER WITH OPTIONAL
HEAVY DUTY AXLE HOUSING
30
386-073 MXL 17T MERITOR EXTENDED LUBE MAIN
DRIVELINE WITH HALF ROUND YOKES
60 60
388-073 MXL 17T MERITOR EXTENDED LUBE INTERAXLE
DRIVELINE WITH HALF ROUND YOKES
452-006 DRIVER CONTROLLED TRACTION
DIFFERENTIAL - BOTH TANDEM REAR AXLES
30
878-023 (1) INTERAXLE LOCK VALVE, (1) DRIVER
CONTROLLED DIFFERENTIAL LOCK FORWARD-
REAR AND REAR-REAR AXLE VALVE
87A-001 BLINKING LAMP WITH EACH INTERAXLE LOCK
SWITCH, INTERAXLE UNLOCK DEFAULT WITH
IGNITION OFF
87B-004 BLINKING LAMP WITH EACH MODE SWITCH,
DIFFERENTIAL UNLOCK WITH IGNITION OFF,
ACTIVE <5 MPH
423-020 MERITOR 16.5X7 Q+ CAST SPIDER CAM REAR
BRAKES, DOUBLE ANCHOR, FABRICATED
SHOES
20
433-002 NON-ASBESTOS REAR BRAKE LINING
434-003 STANDARD BRAKE CHAMBER LOCATION
451-023 CONMET CAST IRON REAR BRAKE DRUMS
440-006 REAR OIL SEALS
426-101 WABCO TRISTOP D LONGSTROKE 2-DRIVE
AXLE SPRING PARKING CHAMBERS
428-003 HALDEX AUTOMATIC REAR SLACK ADJUSTERS
41T-002 CURRENT AVAILABLE SYNTHETIC 75W-90 REAR
AXLE LUBE
Rear Suspension
622-1CH HENDRICKSON RT403 @40,000# REAR
SUSPENSION
720
621-016 HENDRICKSON RT/RTE - 7.19" SADDLE
431-001 STANDARD AXLE SEATS IN AXLE CLAMP
GROUP
624-011 52 INCH AXLE SPACING
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 9 of 16
Data Code
Description
Weight
Front
Weight
Rear
628-004 STEEL BEAMS AND RUBBER CENTER
BUSHINGS WITH BAR PIN ADJUSTABLE END
CONNECTIONS
623-005 FORE/AFT CONTROL RODS
Brake System
018-002 AIR BRAKE PACKAGE
490-100 WABCO 4S/4M ABS
871-001 REINFORCED NYLON, FABRIC BRAID AND WIRE
BRAID CHASSIS AIR LINES
904-001 FIBER BRAID PARKING BRAKE HOSE
412-001 STANDARD BRAKE SYSTEM VALVES
46D-002 STANDARD AIR SYSTEM PRESSURE
PROTECTION SYSTEM
413-002 STD U.S. FRONT BRAKE VALVE
432-003 RELAY VALVE WITH 5-8 PSI CRACK PRESSURE,
NO REAR PROPORTIONING VALVE
480-088 WABCO SYSTEM SAVER HP WITH INTEGRAL
AIR GOVERNOR AND HEATER
479-003 AIR DRYER MOUNTED INBOARD ON LH RAIL
460-001 STEEL AIR BRAKE RESERVOIRS
477-004 PULL CABLES ON ALL AIR RESERVOIR(S)
Trailer Connections
296-027 PRIMARY CONNECTOR/RECEPTACLE WIRED
FOR COMBINATION STOP/TURN, CENTER PIN
POWERED THROUGH IGNITION WITH STOP
SIGNAL PREWIRE PACKAGE
297-001 SAE J560 7-WAY PRIMARY TRAILER CABLE
RECEPTACLE MOUNTED END OF FRAME
5 5
335-004 UPGRADED CHASSIS MULTIPLEXING UNIT
32A-002 UPGRADED BULKHEAD MULTIPLEXING UNIT
Wheelbase & Frame
545-662 6625MM (261 INCH) WHEELBASE
546-102 7/16X3-9/16X11-1/8 INCH STEEL FRAME
(11.11MMX282.6MM/0.437X11.13 INCH) 120KSI
490 330
547-001 1/4 INCH (6.35MM) C-CHANNEL INNER FRAME
REINFORCEMENT
270 450
552-063 2550MM (100 INCH) REAR FRAME OVERHANG
55W-009 FRAME OVERHANG RANGE: 91 INCH TO 100
INCH
-70 300
AC8-99D CALC'D BACK OF CAB TO REAR SUSP C/L (CA) :
195.28 in
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 10 of 16
Data Code
Description
Weight
Front
Weight
Rear
AE8-99D CALCULATED EFFECTIVE BACK OF CAB TO
REAR SUSPENSION C/L (CA) : 162.28 in
AE4-99D CALC'D FRAME LENGTH - OVERALL : 391.34 in
FSS-0LH CALCULATED FRAME SPACE LH SIDE : 140.16
in
FSS-0RH CALCULATED FRAME SPACE RH SIDE : 114.48
in
553-001 SQUARE END OF FRAME
550-001 FRONT CLOSING CROSSMEMBER
559-001 STANDARD WEIGHT ENGINE CROSSMEMBER
561-001 STANDARD CROSSMEMBER BACK OF
TRANSMISSION
562-001 STANDARD MIDSHIP #1 CROSSMEMBER(S)
572-001 STANDARD REARMOST CROSSMEMBER
565-001 STANDARD SUSPENSION CROSSMEMBER
Chassis Equipment
556-997 OMIT FRONT BUMPER, CUSTOMER INSTALLED
SPECIAL BUMPER, DOES NOT COMPLY WITH
FMCSR 393.203
-100
586-024 FENDER AND FRONT OF HOOD MOUNTED
FRONT MUDFLAPS
551-007 GRADE 8 THREADED HEX HEADED FRAME
FASTENERS
605-103 D15-28195-000 CENTER PUNCH TO MARK
CENTERLINE OF REAR SUSPENSION ON TOP
FLANGE OF FRAME
607-001 CLEAR FRAME RAILS FROM BACK OF CAB TO
FRONT REAR SUSPENSION BRACKET, BOTH
RAILS OUTBOARD
Fuel Tanks
204-998 NO LH FUEL TANK -85 -20
230-055 80 DGE CNG FUEL TANKS, 3X21" DIAMETER 1,090 560
231-008 STACKED TRANSVERSE MOUNTING BACK OF
CAB FOR CNG TANKS WITH PAINTED
SHIELDING
80 50
664-001 PLAIN STEP FINISH
205-063 LH CNG NGV1 STANDARD FILL RECEPTACLE
AND DUST CAPS WITH ADDITIONAL HIGH FLOW
AND DEFUELER RECEPTACLES
220-008 CNG FUEL HEATING SYSTEM 10
216-059 SINGLE CNG FUEL LINE WITH IN-LINE
SOLENOID SHUTOFF VALVE AND PRESSURE
REGULATOR
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 11 of 16
Data Code
Description
Weight
Front
Weight
Rear
202-020 STAINLESS STEEL AND SYNTHETIC RUBBER
FLEXIBLE FUEL LINES - NATURAL GAS SERVICE
Tires
093-1VM MICHELIN X LINE ENERGY Z 315/80R22.5 20 PLY
RADIAL FRONT TIRES
50
094-13T MICHELIN X WORKS D 11R22.5 16 PLY RADIAL
REAR TIRES
248
Hubs
418-060 CONMET PRESET PLUS PREMIUM IRON FRONT
HUBS
450-060 CONMET PRESET PLUS PREMIUM IRON REAR
HUBS
Wheels
502-433 ACCURIDE 29039 22.5X9.00 10-HUB PILOT 5.25
INSET 5-HAND STEEL DISC FRONT WHEELS
66
505-657 ACCURIDE 51408 ACCU-LITE 22.5X8.25 10-HUB
PILOT 2-HAND STEEL DISC REAR WHEELS
496-011 FRONT WHEEL MOUNTING NUTS
497-011 REAR WHEEL MOUNTING NUTS
Cab Exterior
829-072 112 INCH BBC FLAT ROOF ALUMINUM
CONVENTIONAL CAB
650-008 AIR CAB MOUNTING
754-017 BOLT-ON MOLDED FLEXIBLE FENDER
EXTENSIONS
10
678-001 LH AND RH GRAB HANDLES
646-023 HOOD MOUNTED CHROMED PLASTIC GRILLE
65X-003 CHROME HOOD MOUNTED AIR INTAKE GRILLE
644-004 FIBERGLASS HOOD
690-017 HOOD LINER, ADDED FIREWALL AND FLOOR
HEAT INSULATION
5
727-1AJ DUAL 14 INCH ROUND POLISHED AIR HORNS 8
726-001 SINGLE ELECTRIC HORN
728-002 DUAL HORN SHIELDS
575-001 REAR LICENSE PLATE MOUNT END OF FRAME
312-038 INTEGRAL HEADLIGHT/MARKER ASSEMBLY
WITH CHROME BEZEL
302-001 (5) AMBER MARKER LIGHTS
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 12 of 16
Data Code
Description
Weight
Front
Weight
Rear
294-090 OMIT STOP/TAIL/BACKUP LIGHTS AND PROVIDE
WIRING FOR COMBINED STOP/TURN LIGHTS TO
FOUR FEET BEYOND END OF FRAME
-5
300-015 STANDARD FRONT TURN SIGNAL LAMPS
744-1BC DUAL WEST COAST BRIGHT FINISH HEATED
MIRRORS WITH LH AND RH REMOTE
797-001 DOOR MOUNTED MIRRORS
796-001 102 INCH EQUIPMENT WIDTH
743-204 LH AND RH 8 INCH BRIGHT FINISH CONVEX
MIRRORS MOUNTED UNDER PRIMARY
MIRRORS
729-001 STANDARD SIDE/REAR REFLECTORS
275-061 PARK BRAKE REMINDER WARNING SYSTEM
768-043 63X14 INCH TINTED REAR WINDOW
661-003 TINTED DOOR GLASS LH AND RH WITH TINTED
NON-OPERATING WING WINDOWS
654-027 RH AND LH ELECTRIC POWERED WINDOWS,
PASSENGER SWITCHES ON DOOR(S)
4
663-013 1-PIECE SOLAR GREEN GLASS WINDSHELD
659-019 2 GALLON WINDSHIELD WASHER RESERVOIR
WITHOUT FLUID LEVEL INDICATOR, FRAME
MOUNTED
Cab Interior
707-1AK OPAL GRAY VINYL INTERIOR
706-013 MOLDED PLASTIC DOOR PANEL
708-013 MOLDED PLASTIC DOOR PANEL
772-006 BLACK MATS WITH SINGLE INSULATION
785-004 DASH MOUNTED ASH TRAY(S) WITHOUT
LIGHTER
691-008 FORWARD ROOF MOUNTED CONSOLE WITH
UPPER STORAGE COMPARTMENTS WITHOUT
NETTING
694-010 IN DASH STORAGE BIN
742-007 (2) CUP HOLDERS LH AND RH DASH
680-006 GRAY/CHARCOAL FLAT DASH
700-002 HEATER, DEFROSTER AND AIR CONDITIONER
701-001 STANDARD HVAC DUCTING
703-005 MAIN HVAC CONTROLS WITH RECIRCULATION
SWITCH
170-015 STANDARD HEATER PLUMBING
130-041 VALEO HEAVY DUTY A/C REFRIGERANT
COMPRESSOR
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 13 of 16
Data Code
Description
Weight
Front
Weight
Rear
702-002 BINARY CONTROL, R-134A
* 739-033 STANDARD INSULATION
285-013 SOLID-STATE CIRCUIT PROTECTION AND
FUSES
280-007 12V NEGATIVE GROUND ELECTRICAL SYSTEM
324-011 DOME DOOR ACTIVATED LH AND RH, DUAL
READING LIGHTS, FORWARD CAB ROOF
657-001 DOOR LOCKS AND IGNITION SWITCH KEYED
THE SAME
78G-002 KEY QUANTITY OF 2
655-005 LH AND RH ELECTRIC DOOR LOCKS
284-023 (1) 12 VOLT POWER SUPPLY IN DASH
756-338 BASIC ISRINGHAUSEN HIGH BACK AIR
SUSPENSION DRIVERS SEAT WTIH
MECHANICAL LUMBAR AND INTEGRATED
CUSHION EXTENSION
30
760-235 2 MAN TOOL BOX MID BACK NON SUSPENSION
PASSENGER SEAT
20
711-004 LH AND RH INTEGRAL DOOR PANEL ARMRESTS
758-036 VINYL WITH VINYL INSERT DRIVER SEAT
761-036 VINYL WITH VINYL INSERT PASSENGER SEAT
763-101 BLACK SEAT BELTS
532-002 ADJUSTABLE TILT AND TELESCOPING
STEERING COLUMN
10
540-015 4-SPOKE 18 INCH (450MM) STEERING WHEEL
765-002 DRIVER AND PASSENGER INTERIOR SUN
VISORS
Instruments & Controls
732-004 GRAY DRIVER INSTRUMENT PANEL
734-004 GRAY CENTER INSTRUMENT PANEL
870-001 BLACK GAUGE BEZELS
486-006 LOW AIR PRESSURE INDICATOR LIGHT AND
AUDIBLE ALARM WITH (1) ADDITIONAL PARK
SWITCH FOR CUSTOMER USE
840-002 2 INCH PRIMARY AND SECONDARY AIR
PRESSURE GAUGES
198-025 INTAKE MOUNTED AIR RESTRICTION
INDICATOR WITHOUT GRADUATIONS
149-013 ELECTRONIC CRUISE CONTROL WITH
SWITCHES IN LH SWITCH PANEL
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 14 of 16
Data Code
Description
Weight
Front
Weight
Rear
156-007 KEY OPERATED IGNITION SWITCH AND
INTEGRAL START POSITION; 4 POSITION
OFF/RUN/START/ACCESSORY
811-042 ICU3S, 132X48 DISPLAY WITH DIAGNOSTICS, 28
LED WARNING LAMPS AND DATA LINKED
160-038 HEAVY DUTY ONBOARD DIAGNOSTICS
INTERFACE CONNECTOR LOCATED BELOW LH
DASH
844-001 2 INCH ELECTRIC FUEL GAUGE
148-003 PROGRAMMABLE RPM CONTROL -
ELECTRONIC ENGINE
856-001 ELECTRICAL ENGINE COOLANT TEMPERATURE
GAUGE
864-001 2 INCH TRANSMISSION OIL TEMPERATURE
GAUGE
830-017 ENGINE AND TRIP HOUR METERS INTEGRAL
WITHIN DRIVER DISPLAY
372-051 CUSTOMER FURNISHED AND INSTALLED PTO
CONTROLS
852-002 ELECTRIC ENGINE OIL PRESSURE GAUGE
679-001 OVERHEAD INSTRUMENT PANEL
746-137 AM/FM/WB WORLD TUNER RADIO WITH
BLUETOOTH, USB AND AUXILIARY INPUTS,
J1939
10
747-001 DASH MOUNTED RADIO
750-002 (2) RADIO SPEAKERS IN CAB
* 753-008 AM/FM ANTENNA MOUNTED ON LH SIDE
MIRROR
810-027 ELECTRONIC MPH SPEEDOMETER WITH
SECONDARY KPH SCALE, WITHOUT
ODOMETER
817-001 STANDARD VEHICLE SPEED SENSOR
812-001 ELECTRONIC 3000 RPM TACHOMETER
6TS-003 (2) TMC RP 1226 ACCESSORY CONNECTORS:
(1) LOCATED BEHIND DASH B PANEL AND (1)
LOCATED PASSENGER SIDE OF DASH
162-002 IGNITION SWITCH CONTROLLED ENGINE STOP
836-015 DIGITAL VOLTAGE DISPLAY INTEGRAL WITH
DRIVER DISPLAY
660-008 SINGLE ELECTRIC WINDSHIELD WIPER MOTOR
WITH DELAY
304-001 MARKER LIGHT SWITCH INTEGRAL WITH
HEADLIGHT SWITCH
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 15 of 16
Data Code
Description
Weight
Front
Weight
Rear
882-018 ONE VALVE PARKING BRAKE SYSTEM WITH
DASH VALVE CONTROL AUTONEUTRAL AND
WARNING INDICATOR
299-013 SELF CANCELING TURN SIGNAL SWITCH WITH
DIMMER, WASHER/WIPER AND HAZARD IN
HANDLE
298-039 INTEGRAL ELECTRONIC TURN SIGNAL
FLASHER WITH HAZARD LAMPS OVERRIDING
STOP LAMPS
Design
065-000 PAINT: ONE SOLID COLOR
Color
980-5F6 CAB COLOR A: L0006EY WHITE ELITE EY
986-020 BLACK, HIGH SOLIDS POLYURETHANE CHASSIS
PAINT
98K-5F6 PAINT-FUEL CABINET: L0006EY WHITE ELITE EY
962-972 POWDER WHITE (N0006EA) FRONT
WHEELS/RIMS (PKWHT21, TKWHT21, W, TW)
966-972 POWDER WHITE (N0006EA) REAR
WHEELS/RIMS (PKWHT21, TKWHT21, W, TW)
963-003 STANDARD E COAT/UNDERCOATING
Certification / Compliance
996-001 U.S. FMVSS CERTIFICATION, EXCEPT SALES
CABS AND GLIDER KITS
Secondary Factory Options
999-069 DLR/CUST ADVISED&ACCEPTS POTENTIAL
INTERFERENCE BTWN FRONT TIRE & WASHER
BOTTLE
Sales Programs
NO SALES PROGRAMS HAVE BEEN SELECTED
T O T A L V E H I C L E S U M M A R Y
Weight Summary
Weight
Front
Weight
Rear
Total
Weight
Factory Weight+ 9583 lbs 8579 lbs 18162 lbs
Prepared for:
Sheldon
Seward
TEREX UTILITIES BB
500 OAKWOOD RD
WATERTOWN, SD 57201
Phone: 605-882-5515
Prepared by:
Zachary Burt
FOUR STAR FREIGHTLINER OF
MONTGOMERY
3140 HAYNEVILLE ROAD
MONTGOMERY, AL 36108
Phone: 334-263-1085
Application Version 11.7.303
Data Version PRL-23M.001
2024 City of Azusa Light & Water
C6060 (CNG)
06/24/2022 1:52 PM
Page 16 of 16
Total Weight+ 9583 lbs 8579 lbs 18162 lbs
Extended Warranty
WAG-010 TOWING: 1 YEAR/UNLIMITED MILES/KM EXTENDED TOWING
COVERAGE $550 CAP FEX APPLIES (AT NO ADDITIONAL CHARGE)
(+) Weights shown are estimates only.
If weight is critical, contact Customer Application Engineering.
(***) All cost increases for major components (Engines, Transmissions, Axles, Front and Rear Tires) and government mandated
requirements, tariffs, and raw material surcharges will be passed through and added to factory invoices.
Terex Utilities, Inc.
3140 15th Ave SE, Watertown, SD 57201
Phone: 605-882-4000 Fax: 605-882-1842
QuotationPage 1
07/15/2022 Quote Number: QU22438-03
CITY OF AZUSA LIGHT & WATER
729 NORTH AZUSA AVENUE
AZUSA, CA 91702
Attention: HIEN VUONG
Phone: (626)812-5172Qty. Description
UNIT
1 One (1) new Terex Commander 6060 model hydraulic rotating digger derrick with a turntable winch.
Design Criteria:
* Design criteria is in accordance with current industry and engineering standards applicable and
accepted for structural and hydraulic design.
* Meets ANSI/ASSE A10.31-2019.
Elevation:
* From +80 degrees above horizontal to -20 degrees below horizontal.
Dual Lift Cylinders:
* Double-acting cylinders with chrome plated rods and integral holding valves. Trapezoid mounting
design offers greater boom support and stability providing less wear and longer life. Either
cylinder can hold the rated lifting capacity of the derrick.
Steel Lower Boom:
* The boom is a fabricated box utilizing high-strength steel plates.
Steel Intermediate Boom:
* Fabricated box constructed of high strength steel. Powered by a double acting hydraulic cylinder
equipped with integral holding valves on both extend and retract ports.
Fiberglass Hydraulic Upper Boom:
* Capable of lifting the hydraulic capacity of the derrick in all positions.
* Tested and rated for line voltage up to and including 46 KV AC.
* Tapered non-metallic rollers mounted at the end of the intermediate boom support the fiberglass
boom under load minimizing scratches and abrasions. The sides of the fiberglass boom are supported
and guided by non-metallic rollers to reduce tracking.
Continuous And Unrestricted Rotation:
* A hydraulic rotary manifold provides a rotating oil distribution system for continuous and
unrestricted rotation.
Miscellaneous:
* Relief valves to protect the derrick circuits and digger-winch circuits.
* Hydraulic hoses are equipped with permanent type hose fittings.
* A custom load chart stating actual lifting capacity considering all final options, chassis, body,
***ALTERNATE QUOTE FOR DIGGER, AUGER AND ASSOCIATED ITEMS OPTION***
Quotation
QU22438-03
Page 2
Qty. Description
outriggers, and other fixed equipment with capacity based on completed unit stability is included.
* A boom-angle indicator and decal are mounted on each side of the lower boom.
* All metallic components of the complete digger derrick device are prime painted.
* Two complete manuals providing operational and maintenance procedures, and a replacement parts
listing.
* Warning decals provided with unit.
Turntable Winch Including Transferable Pole Buddy Assembly:
* 15,000 lb. bare drum capacity planetary winch equipped with hydraulic counterbalance valve
mounted on the derrick turntable. Equipped with flanged pole buddy transferable from intermediate
boom to upper boom.
Bare Boom Lift Capacities:
* Boom Angle: All Booms Retracted
* Maximum Elevation 38050 lbs.
* 10 Ft. Radius 18100 lbs.
Work Zone Capacities:
Median Digging Radius 26.9 ft.
Digging Capacity at Median Radius 3194 lbs.
Lift Capacity at Median Radius 5025 lbs.
Sheave Height:
* With intermediate boom extended, 47.2 ft. at maximum elevation.
* With upper boom extended, 60.0 ft. at maximum elevation.
* Dimensions are based on a 40" chassis frame height.
Load Radius:
* 37.3 ft. from C/L of rotation, at 0 degree, intermediate boom extended.
* 50.3 ft. from C/L of rotation, at 0 degree, upper boom extended.
1 RH Command Post Radio Controls:
* Provides individual levers in a console on the command post.
* Permanent type control decals are provided.
* Adjustable cushioned operator seat is provided as standard and includes side rails.
* Hydraulic foot throttle.
* Command post access step and hand rail installed.
* Includes (1) waist harness, (2) rechargeable batteries, (1) battery charger, (1) receiver, (1)
transmitter, and placards.
* Includes a control and horn.
* Stop/start at control station.
Note:This will require Combined System Hydraulics - Not available Single Speed Hydraulics.
1 Operator light at controls at command post/console.
1 Pole Guide and Interlock For Transferable Pole Buddy:
* Hydraulic cylinders equipped with holding valves operate the tilt and open/close on pole guide
arms.
* Pole guide hoses are contained in a chain type carrier, installed on the side of the boom.
* Transfers from the end of the intermediate boom to the end of the upper boom and vice versa.
* The pole guide is installed on the transferable pole buddy flange assembly.
***ALTERNATE QUOTE FOR DIGGER, AUGER AND ASSOCIATED ITEMS OPTION***
Quotation
QU22438-03
Page 3
Qty. Description
* Protects both the pole guide and the boom from accidental damage caused by extending the upper
boom while the pole guide is on the intermediate boom and tilted downward. Includes actuating
plunger and two poppet valves.
** ALTERED FROM STANDARD **
1 Removable Pole Guide & Combination Jib/Crossarm Attachment (TPN: Y555):
(1) Removable Pole Guide - Lrg. Claw Arms handle up to 29-Inch Dia. Poles.
(1) Multi-Phase Lifting Jib:
* 4x6-Inch x 10-Feet Long Fiberglass Combination Jib - (7) Extension
-- Positions.
* Mounting Bracket Rotates & (4) Manual Articulating Pinning Positions.
* Includes End Mount Sheave & (4) Hastings Wire Holders
(1) Single Phase Vertical Lifter - 5.25-Inch Diameter with Wire Holder.
* Comb. Jib & Lifter are interchangeable with Removable Pole Guide.
* See Terex PD1053 for additional information.
1 Load Moment Limiter (Hydraulic Overload Protection) for Boom system:
* An Operator aid to prevent damage to the derrick by stopping selected functions if an over load
occurs. The functions necessary to eliminate the overload condition remain operational, to relieve
the cause of overload.
* Disables boom down, boom extend, winch up, and digger dig when boom lift senses an overloaded
condition.
* The system is fully automatic relative to the operation and re-set functions.
Pressure Gauge with Color Zone Ring for Load Moment Limiter:
* A indicator gauge which provides an indicator when approaching maximum capacity.
1 Planetary Slip Rotation:
oPlanetary gear drive rotation with spring applied hydraulically released parking brake and
reversible hydraulic motor with integral hydraulic braking capability. The slip drive releases the
brake
when rotating, winching, and digging.
oOffers side load protection when winching and digging only.
1 Customer Declined, Anti-Two Block.
* Purchaser is aware of OSHA Crane and Derrick standard, subpart CC for construction (1926.1416).
1 12,000 ft-lb Two Speed Digger With Hydraulic Shift (ESK 76BA):
* Planetary gear drive powered by reversible hydraulic motor.
* Telescopic trombone tube is provided to shift the two-speed digger hydraulically.
1 LH Auger Storage and Digger Hanger:
* Digger hanger bracket is box section and is equipped with a transfer protection system, auger
stowage bracket with self latching auger catch and hydraulic auger release.
* The auger stowage bracket stores up to a 24" diameter auger, in the standard position.
* Digger storage protection system to protect the auger storage cable from damage caused by
over-winding. Oil from the digger system is returned to tank before the cable is over-stressed.
1 Wire rope cable for auger roll-up.
***ALTERNATE QUOTE FOR DIGGER, AUGER AND ASSOCIATED ITEMS OPTION***
Quotation
QU22438-03
Page 4
Qty. Description
1 Solid Hex Auger Shaft with Coupler:
* 60" long x 2-5/8" hex auger shaft with auger adjustment holes.
1 Terex Texoma 20" BTA (spiral bullet tooth auger) x 104" long - 60" of 1/2" upper & 1" lower
flighting,
2 5/8" hex bushing. Rollup dish and cable pin welded in place and auger painted Terex Red.
1 Pedestal:
* Square constructed pedestal has access holes for maintenance of hydraulic plumbing.
1 Terex South Dakota, Inc. Pole Puller: (P/N 0467557)
* Rated Capacity is 60,000 lbs.
* Base plate dimension is 8 in. x 12 in.
* 7 feet of steel chain.
1 Return Line Filter Condition Warning Light.
* Includes light and a sensor to be installed after unit is mounted.
* Note: Does not include reservoir.
1 Boom Stow Protection For Controls Above Rotation:
* Protects against damage from excessive down pressure by cutting off oil supply to the derrick.
* Includes a 2 channel electric collector ring.
1 Pump For Use (Required Approximate 120% PTO):
Tandem vane high efficiency 3000 psi rated hydraulic pump providing 40 gallons per minute combined
flow.
* Provides 16 gallons per minute to boom functions and 24 gallons per minute to digger/winch
functions and combines flow when boom is not in operation providing 40 gallons per minute to
digger/winch at 1600 rpm engine speed, boom extension is faster than winch.
* Provides up to 6 gallons per minute for tools at 700 rpm engine speed.
*Includes pump kit.
FOR GENERAL ONLY: With the use of Radio Controls.
1 Hydraulic Reservoir:
50 gallon hydraulic oil reservoir includes 10 micron replaceable cartridge type return line filter
mounted in reservoir with bypass valve incorporated in filter to prevent restricted flow.
* A 100 mesh in screen in filter cap. A 40 mesh screen included in tank outlet and a 2 1/2" full
flow ball type shut off valve.
* Relief valves to protect the derrick circuits and digger-winch circuits.
1 Super Duty A-Frame Outriggers with swivel type stabilizer pads. (8982)
1 Super Duty A-Frame Outriggers with swivel type stabilizer pads. (8982)
1 Controls For 2-Sets Of Outriggers And Auxiliary Tool Outlets Below Rotation (Diggers):
* Recessed at rear of truck each side for ease of view for outrigger placement.
* Includes switches and alarm for outrigger in motion alarm.
1 High Pressure code to obtain 3000 psi at outriggers.
Note - this is on A-frames and Radial outriggers for Digger Derricks.
***ALTERNATE QUOTE FOR DIGGER, AUGER AND ASSOCIATED ITEMS OPTION***
Quotation
QU22438-03
Page 5
Qty. Description
1 Adjustable flow divider for auxiliary tool outlets below rotation.
1 Outrigger Interlock:
* To operate the boom the outriggers must be extended.
** ALTERED FROM STANDARD **
1 Custom Subframe constructed with an open center:
* 8-Inch Tall X 232.0-Inch Long.
* Terex PN: 493643.
** ALTERED FROM STANDARD **
1 Custom Tie Down Kit for 8-Inch Tall Subframe:
* Terex PN: TBD - Similar to 608851.
1 Remote Sensor Bracket:
* Bracket to be used with the Williams remote sensor. Installed to supply sensor to work with truck
engine.
1 Terex Advanced Chassis Controller:
* Multiplexed system to include: Controller, LCD Screen, Manual and Schematics.
* Standard Options: Diagnostics, Status Screens, Event Log, Hours Meter, Selectable Button Labels,
System Alerts and System Test.
* Programmable settings allow installer to customize/select options need for their application.
* Screw terminal-type connections and enclosure to cover connections.
* Recommended on Class 6 and above chassis with multiple outputs
* The PTO hour is standard. The engine hour meter is standard (When available). This is a message
we get from the truck Data link. All trucks except Ford give us the Engine hours. So if it's a
Ford, we just display PTO hours.
1 American flag displayed on unit.
1 Factory Warranty
1 Clevis for two part line attachment.
1 Two Part Sheave Assembly with 12 ton capacity:
* Two-part line attachment includes one snatch block.
** ALTERED FROM STANDARD **
1 .
BODY, INSTALLATION
** BODY INFORMATION **
1 Steel Transverse Tandem Bobtail Body and Accessories:
* As per the attached Body Specifications.
1 Install Derrick Over Rear Axle And Install All Associated Components:
***ALTERNATE QUOTE FOR DIGGER, AUGER AND ASSOCIATED ITEMS OPTION***
Quotation
QU22438-03
Page 6
Qty. Description
* Final test and inspect completed unit including stability and dielectric testing
per manufacturers requirements.
1 Hose and fittings to connect the hydraulic system from the oil reservoir to the
pump and unit.
1 Installation on Compressed Natural Gas Fuelled Chassis:
1 Power take off with indicator light for automatic transmission.
1 DOT Inspection.
1 Set chassis parameters.
1 Back-up alarm to sound when the vehicle is shifted into reverse.
4 24" x 24" x 2" poly outrigger pads.
* Includes outrigger pad storage.
2 Installation of Body Vendor Supplied Outrigger Pad Holder(s) and
Retainer(s):
* Terex PN: None.
2 Rubber wheel chocks with handle.
1 Mounting bracket for water cask for exterior mounting.
* Location to be determined on Approval Drawings.
1 Grab handles as necessary for 3-point contact.
1 Installation of Body Vendor Supplied Access Steps:
* (2) Rear Cable Steps.
* (2) Bed Area Steps.
* (1) Side Access Cable Step.
1 Access step mounted on floor of the body to access the top of body compartment or access platform.
1 Fold-up access step mounted on command post.
2 Mud flap with logo 30" tall.
Note: Trim As-Required.
1 A mounting kit for over 45" flatbed frame height for a pair of mud flaps.
1 Jib storage bracket.
***ALTERNATE QUOTE FOR DIGGER, AUGER AND ASSOCIATED ITEMS OPTION***
Quotation
QU22438-03
Page 7
Qty. Description
1 Tilt Table Accessory Storage Brackets:
* Storage Brackets for Pole Claw Bracket or Tilt Table Accessories.
* Terex PN: TBD.
2 Pull-Out D-Ring Kit(s):
* Locate (1) on Rear Face of Streetside Rear Outrigger - Facing Streetside.
* Locate (1) on Rear Face of Curbside Rear Outrigger - Facing Curbside.
* Reinforce as necessary for use with Capstan Head.
* Similar to Terex PN: 65370545.
1 Boom rest.
1 Digger Derrick single position boom rest saddle.
1 Peterson LED 7-lamp DOT Lighting Package:
* Complies with FMVSS 108.
* Includes required lights, junction box and wiring harness.
1 Lighted license plate bracket kit with LED light.
1 Peterson Clearance Light Kit with 2.50" Amber, LED.
2 Amber strobe light (LED) with 4" tall & 6" dia. lens, and branch guard.
* Locate (1) on Streetside of Boom Rest.
* Locate (1) on Streetside Rear of Body.
1 Strobe mounting bracket.
1 Strobe post mount bracket weldment for medium chassis.
Note: Includes (2) 104381 corner gussets on bracket.
1 Body Compartment Lighting Switch & Wiring:
* Body Compartment Lighting to be wired to Terex Advanced Chassis Controller
-- Switch - Energised when Chassis Lights are ON.
2 Remote engine stop/start OR two speed control from rear of vehicle.
* Locate Stop/Start & Two Speed at Streetside Capstan Controls.
2 Remote engine stop/start And two speed control from rear of vehicle.
* Locate (1) Curbside Capstan Controls.
* Locate (1) at Outrigger Controls at Rear.
***ALTERNATE QUOTE FOR DIGGER, AUGER AND ASSOCIATED ITEMS OPTION***
Quotation
QU22438-03
Page 8
Qty. Description
1 Premier 480 pintle hook:
* Safety chain eyes.
* Chassis frame reinforcements.
"Pintle hook brackets and attachment methods are designed to meet the associated pintle hook
ratings. They are not designed for recovery purposes. If recovery attachments are required, please
order the appropriate tow eyes."
* Locate Throat approx. 28-Inches from Ground.
1 ICC rear bumper.
1 7-prong trailer socket.
NOTE: Stop & turn signal lights on combined circuit.
1 Heat shields, as required to protect hydraulic system from exhaust.
1 Oil tank mounting for external reservoirs.
* Locate at Streetside Front of Cargo Area - Under Rubber Goods Storage.
80 Fill with Hydraulic oil for general purpose use.
* Refer to the product maintenance manual for specific type to be used.
1 200-Feet of 1-Inch Diameter Amsteel II Plus Uncoated Winch Rope:
* Eye on each end of Rope.
* Standard Color.
* Minimum (4) wraps on Winch Drum per Amsteel Guidelines.
* Similar to Terex PN: 65366203.
1 Crosby, Hook and Jam, Swivel, 10 ton w/Latch Assy.
1 Hannay spring loaded hydraulic hose reel with 4-way roller assembly.
* 50' of 1/2" Hose Set.
* Quick disconnect HTMA male and female flush faced couplers and dust covers.
* Installed on hose reel with ball stop.
* Locate on Tailshelf - Payout to Rear.
* Set to 6-GPM and 2000-PSI.
1 Pole puller storage bracket with tie down strap.
* Locate on Curbside Front Outrigger.
1 Safety Kit consists of the following:
* 5-lb ABC fire extinguisher with bracket.
* James King triangle reflector kit.
***ALTERNATE QUOTE FOR DIGGER, AUGER AND ASSOCIATED ITEMS OPTION***
Quotation
QU22438-03
Page 9
Qty. Description
* Fire Extinguisher to be Shipped Loose.
* Locate Triangle Kit behind Passenger Seat.
2 Level indicator, Rieker inclinometer, +/- 5 Degrees.
1 Rear view vision square light camera & 7" monitor system.
1 Braden Hydraulic Two-Speed Front Mounted Bumper Winch Assembly with Dual
-- Extension Shafts:
* Model #05517-AHGU5-12FEEBR-LA-25.
* Winch Single Line Pull 20000-Lbs. Rated Capacity.
* Curbside & Streetside Extended Shafts.
* Four way roller assembly.
* (2) Tow Eyes.
* Miscellaneous hose and fittings.
* Terex PN: 65329789.
1 Wire rope, 5/8" x 200', 6x19, one eye with thimble.
1 Braden 7" ductile iron capstan head.
1 Capstan Head Storage:
* Terex PN: TBD.
1 Electric/Hydraulic Foot Pedal Winch/Capstan Control:
* (1) Winch/Capstan Rotation Switch - Terex PN: 0100541.
* (1) Foot Pedal - Terex PN: 65374998.
* (1) 25-Ft Lead - Terex PN: TBD.
* (1) Socket - Locate at Winch Controls - Terex PN: P916009.
* (1) Trailer Plug - on Lead - Terex PN: 0094112.
* (1) Winch Placard - Similar to Terex PN: P101992.
* (1) Winch Payout Placard - Similar to Terex PN: 0100170.
1 Shackle 1" with 10 ton capacity.
2 Kill Switch(es) at Front Bumper:
* Locate (1) on each side of Front Bumper Winch.
* Terex PN: 65344438.
1 Paint C6000, C7000 derrick one color.
1 Paint front winch one color.
1 Paint body floor with non-skid paint.
***ALTERNATE QUOTE FOR DIGGER, AUGER AND ASSOCIATED ITEMS OPTION***
Quotation
QU22438-03
Page 10
Qty. Description
1 Paint compartment top with non-skid paint.
1 Paint second color.
Paint the Following Areas - YELLOW:
* Boom - 1st Section Only.
* Turntable and Command Post.
* Pedestal.
* Rear Outriggers.
* Boom Rest.
* Front Outriggers.
.
***REMAINDER OF UNIT / BODY & ACCESSORIES TO BE TAFFETA WHITE.
1 Paint premium for yellow, orange or red color.
***CUSTOMER TO VERIFY YELLOW PAINT CODE AT TIME OF ORDER.***
CHASSIS
** CHASSIS INFORMATION **
1 Freightliner M2-112 6x4 Regular Cab Chassis:
* Compressed Natural Gas.
* As per the attached Chassis Specifications.
SPECIAL CHARGES
1 Freight
** ADDITIONAL INFORMATION **
Wheels Up Delivery:
City of Azusa Light & Water
729 North Azusa Avenue
Azusa CA 91702
.
Contact: Hien Vuong
Phone: (626) 812-5172
** ALTERED FROM STANDARD **
1 Terex Utilities to Register/ License & Title Completed Unit prior to
-- Delivery:
* DMV Fees are calculated upon the Quoted Sale Price and may vary at
-- time of invoice.
* Vendor: Road Ready Registration Entities (909)390-3575 Office.
1 First Article Inspection, Digital
** ADDITIONAL INFORMATION **
***ALTERNATE QUOTE FOR DIGGER, AUGER AND ASSOCIATED ITEMS OPTION***
Quotation
QU22438-03
Page 11
Qty. Description
* SpinCar.
10 CALIFORNIA TIRE FEE
** ALTERED FROM STANDARD **
1 .
OPTIONS: ADD
***ALTERNATE QUOTE FOR DIGGER, AUGER AND ASSOCIATED ITEMS OPTION***
QU22438-03
Page 12
Notes:
1. Federal Excise Tax will be added if certificate is not supplied with order.
2. The following items must be considered by the purchaser if not already included:
Back-up Alarm; Strobe Light; Wheel Chocks; Outrigger Pads; Truck Grounding Cable;
Barricade Kit; Boom Stow Interlock; Auxiliary Let Down; and Platform Liner.
3. Terex Utilities, Inc. strongly recommends all installation accessories be located up front in
front in the quote or secondarily on the approved engineering drawing. Any accessories located
or relocated during manufacturing may be subject to additional charges.
4. Terex Utilities, Inc. - Offers In-service Training.
5. Terex Utilities, Inc. - Assembly in Watertown, South Dakota is ISO 9001:2000 Certified.
***ALTERNATE QUOTE FOR DIGGER, AUGER AND ASSOCIATED ITEMS OPTION***